The Jalopy Journal
I bought `98 S10 Blazer rear wiper motor but cannot get it to work. I found wiring diagram on the `net but that didn`t help. I want to bench...
Did you use the Blazer motor like in that post?
International pick ups 1946 -1949 and possibly 1941 - 1945 had 6v electric wiper motors. I have one or two if you need any. These fit above the...
I`ve seen a post on this site about using a wiper motor from a Jeep Liberty in a 1949 - 1950 Chevrolet car. Searching ebay shows slightly...
Lobucrod: I wondered about the diameter of the yoke. I need to find an old yoke or get a TH400 GM tail housing. Thanks for the input.
Hnstray: I`ve only called a few salvage yards. Maybe they don`t have a crossover book but, from what I found on the Internet, the TH400 was used...
Thanks for the posts
I suspected the TH400 was the basically the same trans as the switch pitch. At first, Lokar suggested a shifter for the TH400 but when I told them...
The 430 Buick and switch pitch trans (1967) is snuggly mounted in my `51 Ford coupe but it seems no one makes a shifter for this transmission. A...
Just using what I have. There were no original toe boards or trans tunnel with this car or I definitely would have used them. Had I known the...
36-3window: I have an aftermarket firewall but the w/the orig one is fine so I`m using it. The floor sheet metal came w/the car and would match...
Pie cutting in progress.
Thanks 4tford. I kept the orig firewall so might need a spacer for the pedal. Your trans tunnel appears narrower than mine.
I`m getting some good input here. Thanks to all. Shortening the brake pedal would help, and I do have power discs front & rear. I`m using a GM...
I had not thought of making a dent in the tunnel. Might do that. Thanks rottenleonard.
I haven`t seen one of these cars in a long time but a friend had one in 1970. It was fenderless and I don`t think it had a hood. V8 powered....
[IMG] Using aftermarket sheet metal: trans tunnel, L & R toe pcs. but there is very little room for the accelerator pedal. I do not want to...
Thanks. That`s what I`m considering right now but will research TPI.
Thanks for telling about TPI. I like how their site shows the opening size. 5" gauge / 4 3/8" opening. Other companies make 5" gauges but they...
The two dash openings are 4 3/8 inch. Anyone know of a source for gauges costing less than $500? Thanks
A late welcome to you and good luck w/ your 39 coupe. I have a 39 Deluxe sedan, wondering if there are aftermarket gauges available for 39 Fords,...
Separate names with a comma.
The Jalopy Journal