The Jalopy Journal
In 1965 only chrysler used a column shift for the cable shift transmission.If you could find one that might be an option.
How much pressure do you have in your oxygen tank ?
Go to forabodiesonly.com
are you going to be anywhere near holland,mi?
sounds like rust in the cylinder above one of the pistons maybe try some marvel mystery oil in the cylinders and the fixture someone suggested to...
I have '69 valiant that takes my spare time and money
the early 273 heads were closed chamber heads with different angles for the intake bolts. you can swap the '67 up 318 heads and intake, but will...
I had the same problem with a 69 dodge van brake hose for the front brakes. I found a hose at napa but it needed an adapter on the upper end where...
early thirties mopar might be a close match for an axle with brakes. a friend of mine has a '25 dodge that has no front brakes from the factory...
the a833four speed has the backup switch in the transmission not on the shifter.
it doesn't look like any mopar shifter i have ever seen, but the grease zerk make it apear like a factory part.
the bell housing was the same for three speeds and four speeds from 68 through 74. in 76 when they started making the overdrive four speeds...
the factory small block bell housings were aluminum from 68 -74 and had both the three speed and four speed bolt patterns. the o.d. four speed...
if you can't find the right one slot one of the holes with a round file.
the early mopar small blocks had one hole offset on the harmonic balancer. in the mid 70s they changed to an even spaced pattern.
I used the axle and springs from a 69 Dodge van under my Valiant and it drives as well as most pickup trucks. I think the longer springs make for...
nice find,good to see someone is from around here I am from fennville
I had luck using a box from a 1969 chevy van with a solid axle.
Thanks for the info ,thats exactly what I have.
can anyone tell me what transmissions a Hurst Hydro/gate shifter is used with? I haven't found any information from hurst.
the overdrive transmission was an aluminum case with the 3/4 gear shifter arm upside down
Separate names with a comma.
The Jalopy Journal