The Jalopy Journal
Here is another photo using a bracket and a coupling nut as gimpyshotrods suggested.
Hi Boones, We've also had good luck with the combination of sensor brackets and shaft collars when it comes to tight spaces, you can find shaft...
This is awesome, really nice work elvi. Cant wait to see with the wide whites.
Splitting my manifold Tuesday and having straight pipes ran. What size pipes? 1.50 or 1.75? Straight Six Flathead 54 Dodge. Chime in! Thank you!
Bandit Cisneros Lemanski Anthony White If you're thinking of getting some pinstriping, check out all the "unknowns" on pinheadlounge who care...
On my 54 I really liked the darkened one piece all red lens for the stock 54 from Mooneyes (frenched). Dont know if they still carry them.
In my 54 Dodge I have a 230 flathead straight 6. After the paso maria cruise last weekend, I've decided to ditch my single glasspack - split my...
Have a 54 Dodge flathead straight 6 (230).. Anyone know where I may find a split exhaust manifold for one of these? I've done a search and went...
Again - Thank you to all who helped me with the issue - turned out to be autozone sold me a defective solenoid. Popped in another one from Napa...
Got it. Starter has a red tag. So must be the stock 6V. I went over all connections with sand paper and a wire brush yesterday - so def not...
plym46 thank you for all of the info, much appreciated. And yes I am running a 12V solenoid as you described. As far as the starter, I believe...
31Vicky - good point. I should be fine with a stock 6V starter, correct?
plym 46 - Im retarted - straight six flathead, I wasnt thinking. I believe its a 218?? Ive only had this meadowbrook for about two months, still...
Again, thank you guys. Couple things - went through all of the grounds under the hood again - flatheadgary - the ground running from the block...
Thanks for the suggestions so far. Had it bench tested and dude said it was like a brand new battery. Said it was showing 100% and perfect under...
Thank you all in advance for reading this: 54 Dodge Meadowbrook (converted to 12V) straight 8 - Starting problem. I have done a search but the...
bump
While working out the pluses and minuses in either ditching or keeping my current rear end, I figured I would do some research on how to mount my...
Thank you for your suggestions, Ive called Moser and got a quote of about 400.00 for the new custom axles and the drilling of the drums. They were...
Question for you guys, Setting up the rear end of my 30/31 Model A coupe and have run into an issue. Have a 56 Chevy car rear end here with a 5 X...
Right on. Thank you guys.
Ive done a search and can't find anything - on my cell at the shop and we're trying to take this rear end apart and are stuck... Its supposedly...
Credit Card checks you get in the mail?? I dont think I was getting them when I was 20, but I get them now, and that paid the 8K Im using to...
Replacing wood kit in my 31 model A Sedan, and just so all that read this knows, fordwood.com sells an unbelievable kit. It's pretty remarkable...
I remember spent from sketchkult.com. I haven't been there in a while, but he may have his info listed in the member section on the stripekult forum?
Much better. Nice work!
paint a pane of glass with some black spray paint, flip it over and practice on the non-painted side. then you can blade off your practice and...
My Model A had huge bolts inside the concrete the previous owner had poured into the rear inner fender wells... We pulled it out and all the...
I was thinking of putting the dynamat on the metal, and then installing the wood. Mainly wondering about the wood though. Think I should treat...
Hey guys, received the new roof / body wood kit yesterday. :cool: Question, should I treat the wood with anything prior to the install? Also...
Separate names with a comma.
The Jalopy Journal
