The Jalopy Journal
Used hinges in good condition. One side looks great the other side has rust pitting but no holes in lower side. Off of 52 Ford 2 door. 300.00/ pair.
Looking for help picking some for tires. Mid to late 60s vibe. I see Coker has some Pro Trac 60 series with matching fronts. The wheels are 15x5...
How about baffled zoomies.
Look at the Edelbrock owners manual online. I found some info on page 12 about "Long Duration Cams", if the idle screw is too far open due to low...
Attached the steel bubble to the tub with 2 part panel bond from my paint supplier. glued and screwed in place for 24 hrs, removed the screws and...
The 26-27 T looks like it would have a lot more foot room in the cowl. I like to drive with both feet, little room on the left of the steering...
Shooting for 64-66 time period. 289/ C4, 9", even the radiator is out of a 65 Mustang.
Just finishing this one
Thanks for the ideas, I raised the deck and added a roll pan. Also reduced the size of the tunnel..Looks like dad is checking out the progress.
The 144s were painted blue and the 170s were red, if it has not been painted. These things are prone to hard starting when hot, the fuel boils out...
Here is the current build at our house. I like the turtle deck but it has no storage. Maybe a 30" pickup bed? Where do you guy find room for the...
The guys at Melvin's Classic Ford Parts have a electric wiper conversion kit for the 60-62 Falcon, call them to check fitment on your Comet. They...
Welcome Alex, long time no see. You might remember my non HAMB freindly car!
A quick test for the pop would be to advance the timing and see if it goes away. If it goes away have the dist. re-curved to match your engine...
Mid seventies full size fords. The most common size is 15x6, I have found some in 15x6.5. The hub cap lugs are for a 10.5" caps. The later crown...
I chased a noise/vibration in the Falcon last summer. Replaced both U-joints and had the driveshaft balanced. the noise ended up being a rear a...
Welcome from Crawfordsville. Try running a search here, you should find all of the info you need.
Check the manifold with a straight edge first. Set the manifold on the block without the gaskets and check the fit, intake gaskets are approx....
Take a look at the TCP Global site. I used their Hot Rod Flatz on the roadster with good results. It is single stage, covers well and is...
Wow!
A Belly Tanker with a flathead 4 banger on fuel!!
Forgot the photos!
Unrestored 62 , Lowered and polished. 144 w/ 2spd auto.
Tubing was later added vertically to the door posts to tie the floor to the cab. The bottom of the doors will be shortened and built into rocker...
54 Project Wagon
Great fun, cheap thrills and all of the above comments. They are like riding a motorcycle that won't fall over when you stop! P.S. Power to...
Didn't do the seat or the turbo 350. Built the frame, body, top, wiring, plumbing, door panels, carpet, paint. I think this falls north of 90...
54 Stude project in progress. 4" chop, mustangII w/bags, 9", SBC.
Great find! Stories like this give the rest of us hope. Good luck with the new project.
Great Pics. I took over 200 photos at the show and still see cars here that I missed. My only excuse is that I must have been talking to some of...
Separate names with a comma.