The Jalopy Journal
motor mounts are correct for 64 Chevy pickup. they take a 7/16 -14 bolt
I put mine in a shed close to the shop. Its been out there ten years now. I ran the air line under ground so I get piece and quite and a cooler...
I have done front drums. I followed a how to in a Tex Smith book on how to build a hot rod chassie
I used some off a 1971 galaxie 500 had to use the 57 backing blates 1971 brake shoes wheel cylinders and hardware.
Yes, wind and oil both affect youre welds, try and position youre body to block the wind and wipe off the oil with some lacqer thinner. I also...
Some white spoke wheels have 12 5/8 centers. I searched the swap meets for a pair 7 in. wide and found a pair off a trailer. I am going to the...
What I have done is squert motor oil around the piston turn the motor over this pushes all the grime to the top of the cylinder when the piston is...
66 chevy pickup with 283 had side inlets.
I have not done it personally. I have talked to some friends that have and say it is not that difficult to title and license a home built hot rod...
I am using the same column. I was wondering if you had any of the turn signal wiring figuired out? I pulled mine out of a 61 chevy c50. I have a...
Dont forget a brake control trailer brakes will make a huge difference in stopping. If you get the weight distribution hitch get the sway control...
Looks good maybe it will give my some motovation to get to work.
I'm a tool maker building molds for butter tubs yougert and ice cream. You guys need to eat up because we are getting slow.
The flleetline is very nice well done car and the guy who owns it is a good guy willing to tell you what he did and what works. I enjoyed talking...
I used caswell gas tank epoxy after I welded several tanks together to make one. Had pin holes around filler. I chose it because you didnt have...
I built a roadster 31 roadster pickup starting with a car cowl building doors and the rear of the cab. the inner structure is all 1" box tubing....
I get my blades from msc. I have a old rockwell verticle bandsaw and a import horizontal. I use lenox bimetal blades without coolant and have had...
I put a few pictures in an album in my profile.
I have been looking at the web site for a while for tech articals figured it was time to join. My current project is a 31 chevy roadster pickup I...
Separate names with a comma.
The Jalopy Journal