The Jalopy Journal
Since you only are looking for side shields, I assume that the glasses you want to wear are throw aways. You WILL get pits, scratches and embeded...
Your "G" engine would have used a carb. with a 1 7/16 in.throttle plate and no markings opposite the "Ford" script on the float bowl. The 1949 to...
You can download the Complete manual for free off GM's website: http://www.gm.com/company/gmtunersource/html/race_shop_build_book.htm
I've had good success storing mine flywheel end down bolted to 10" squares of 4X10 "C" channel. I drill 2 holes, a 1/4" larger than the bolt size,...
Stop by Finishline Coatings off McLoughlin on Silver Springs in Milwaukie.(Across the street from The Bomber) Lona can show you examples of...
Go to www.goodtool-online.com and search for "ST-500". This is a 1/2" swedge cutting tool that will cut the "rivet swedge" off your Ford wheel...
Dan, 119 volts is considered good. The current industry standards are 120 volts and 240 volts, + or - 5%. Be aware that an open leg will sometime...
Check your local Home Depot again if you have one near by. The 18v Ryobi's dropped from $59.99 each to 2/$40 in my area also, a few months back. I...
This will get you to the mfr's website. Couldn't get a link to paste. www.americanindustrialsupl.com/techsheets You want 1071.htm Parent...
Hard to relax and enjoy the ride, what with all those cars on the wrong side of the road.:eek: Seriously, are the squiggly lines on the road a...
HemiRambler has a great suggestion. Check with some of the heating contractors in your area. Especially the small independants. They almost always...
Thinking a little outside of the box, have you considered mounting your shifter on the roll cage and using a long cable? You could even mount it...
I grant you that Oregon City isn't very big and I've only lived here for 26 years, but I haven't a clue where your store is. Maybe your address on...
Frank, What the electrician did, was cover 3 areas with 1 GFCI. Every recepticle on that circuit is "GFCI" . In most areas of the country you need...
R-13 is the max for 2X4 walls. If moisture is a problem DO NOT put clear plastic sheeting up over the insulation. It's probably the wrong time...
The wheel cylinder box's that came with my Wilson's, which are based on the Lincolns are, "AutoStar WC13278". Below is says replaces: Bendix...
Yes it does. Try to get the rear brakes as well. If the trans is a 3 speed at a reasonable price, it would be worthwhile also.
Go to Quiimby Welding (www.quimbycorp.com) and get some catalogs. The sales people are great about answering questions. First thing you need to...
By the time you figure the price of the casters, I found that the furniture dollys with 4 swivels casters you can get at Home Depot or Lowes for...
I have rims in 3.5",4" and 5". According to an old timer, 3.5" were standard on V8-60 vehicles. 4" were common to everything else and 5" were on...
Thanks Marty, I'll come see you again when I have some more money burning a hole in my pocket!
Thanks for the info Eric. I'll file that away in my Buick notebook. It would be great to have access to all the different engines out there and to...
I have been lurking around the board for a couple of months after I came across it in a Google search. I used to built Renault and Fiat based...
Separate names with a comma.
The Jalopy Journal