The Jalopy Journal
Work? ok...................
Old post I am aware but just had to call Summit for a replacement 82660 eletronic Winged Tach. Needle bounced around constantly, dropping to zero...
The car in my avatar was, according to the history I have, at one time was run as the "Simonsen Riley". Just wondering if there is any...
Those valve stems look a lot like 6 cylinder 235 Chevrolet.. Good thing is the long stems and you can cut them off as needed.
Call Steve Serr or e-mail him at millerhispeedheads@gmail.com and ask. If not, Rocker Arm Specialists in Anderson Ca, could probably fix you up....
And drop it down over the frame rails about 3" or so. Easy at this point as you have only the sheet metal to tweak and no structure to modify.
Regardless, of size, it should still be possible to get the idle down. Something, somewhere is holding a throttle plate open. I would check the...
as others have offered: https://facet-purolator.com/pumps/
Drill and tap the cover for a 3/8" or 1/2" bolt. Braze the end of the bolt, machine it flat and screw in against cam nose- back off about .010...
Looks like Ford trans also, etc, but what's with that frame? Dropped axle yea, but a dropped frame??? Steering column laid back pretty far...
Steel brake line works pretty well for hard fuel lines.
Congratulations!
Looks like a previous owner cut the bottom out of the float bowl and added that plate with the 4 bolts- wonder what that was about? There should...
Those look to be adapters to go from one size Winfield square base to another Winfield square base. Notice how the carb flanges are a different...
On the Gemsa, fill the chamber with a piston dome with the valve side of the dome slanted so that you can develop some squish and they run pretty...
Info on the fuel pump please! How much pressure does it supply?
That's the wrench you use to loosen the set screw to adjust the position of the chuck stop that locates the stem end of the valve in the chuck....
Is the plan to access the battery thru an opening cut in the seat pan on the passenger side or ??
And if you use a B pan, you will need to make up a filler piece or splice in a chunk of A pan to seal around the rear main cap, as the B cap seal...
Any reason not to put a Model A ring and pinion in it with Model A center section and axles? Just asking...
"I read somewhere that there were single stick conversions, with varying abbreviations like OR and OSR or something of the likes. Does anyone know...
This style works pretty well. Not too expensive:...
Probably a regular valve spring compressor. Collapse the spring and remove the split keys that hold the lower spring retainer onto the valve...
dm sent
April Fools!!
Charlie Yap has some side covers available.
"and yeah the give away that the radiator hoses are on the intake side is that they are attached to carburetors lmao." Hope - those hoses are...
I think an enlarged decal for a windshield or back window would be really cool as well as the air cleaner size. Just something to consider once...
Pioneer PF-497. Generic steel hardened head bolt washer. Summit has them. Seeems the number has changed, but..........
Is it really 1st if there is no race? He He !!
Separate names with a comma.
The Jalopy Journal
