The Jalopy Journal
I found the parts, but alas no pictures on Macs or Snyders
I'm hoping someone on here could provide me with a photo of the subframe that has not been torched apart for a 29 Tudor. I finally got the match...
Oh, and the other real question is there anything that anyone would consider salvageable on it??
Well, definitely no hubcaps with logos and the steering box is on the passenger side, which is kind of strange... That's really about all the more...
Nobody can tell me anything?? Really?!?!
So the other night I was talking with a buddy over a few adult beverages when he asked about the frame for my model a, what it was, etc. Then he...
My dad gave me $10 and a suitcase for my 18th birthday! Told me to never even think about moving back in. So this past year I gave him a 55...
Mine wasn't running when it leaked that bad
Check that block for cracks! I had a Chev pickup given to me that ran great no issues, I decided to do change out the antifreeze in it and change...
I always use 2 chains in the front around the axle, or a arm and 2 chains in the back around the rearend. My trick is to let all the air out of...
How's this for an unfinished project? Couple more weekends and I should have it buttoned up! Had to build more shop so I could move stuff out of...
The more I think about it the more I think maybe it was an international truck of some sort. I do remember I got the thing to take the bed off of...
I do know it's old, but not sure as to what it was originally on, it's still sitting under the frame that at one time was one of those hokey half...
I've been looking for a ford 9" asking around and such and last night as I was on my deck I looked down and noticed that my carbeque seemed to be...
I'd second the keep it notion. Heck it's already got a battery box installed on the firewall!
Ahh, makes me remember using the "carbumeter" you could hook that thing up to any carb and it would tell you what was wrong, too rich, too lean,...
I second Shifty's post!
To me it sounds like a clogged jet in the carb, it gets enough fuel to run at idle but as soon as any vacuum is applied to the carb it's running...
There has got to be a way to get the door panel off and then just pull the rod connected to the latch, if that doesn't work, as stated in the...
Is it the type of latch on the outside that pushes down into the door itself? I've had problems with the latch on my 78 and just wondering if it's...
I couldn't agree more! I just lost my grandmother last week, and when asked by my mother what from her house I wanted, the only thing I could come...
Yeah, it is what it is... I guess that's why there aren't as many out there as there used to be, or everyone would have one. But I am gonna park...
OK, first off I agree with everyone I'm gonna dig a hole and push him into it, count me in! His exact words were that to him it was just a bunch...
So today at work I start talking with the boss about my model a, describing what it looks like and such. And then he proceeds to tell me that...
I had a 43 dodge pickup that was built from just about one or two of every part from every vehicle ever made, and found a guy with a 29 model a...
Is there still any use for more funds? I am always up for helping out anyone whenever I can. Absolutely amazing what everyone has done thus far....
http://www.wallaceracing.com/dynamic-cr.php That should tell you what you want to know.
I know this is an old thread but thought I would add my $0.02 to the mix. I had an 89 full size chevy that the computer decided to die on me in....
You could build mine without the relay just to spark a coil with the flick of a switch. You would have to figure out how to inject the gas or...
If anyone is still interested in doing this, I made a kit a while back using parts from Radio Shack. All it is is a very small circuit that...
Separate names with a comma.
The Jalopy Journal
