The Jalopy Journal
I did know of a stroker kit using the slant 6 rods is there a link to the info?
[ATTACH] [ATTACH] My 1937 with a 261 twin 2 barrel holleys fenton split manifold fenton valve cover modified fenton shifter and fenton t handle on...
[ATTACH] [ATTACH] [ATTACH] I have a 261 with 2x2, mild cam, fenton headers and t-5. I used small block exhaust valves, 1952 powerglide intake...
[ATTACH] [ATTACH] [ATTACH] The truck has 5 speed, straight axle with disc breaks and mono leaf front springs, manual cross steering and air...
my diamondback whitewall started to come apart at half tread and I was told they would do nothing about it. I am now trying cokers, so far so good.
Great Pictures! First time I was able to attend, great time after the rain.
saw the 32 sedan at Springfield, the craftsmanship is outstanding.
The panel is flat with a bead that matches the rocker to the fender, I made the panel and welded and then made the small bead and welded. I made...
as former paramedic and now coroner 3 point belts in my traditional 1937 pickup
like 52HardTop said works great and looks better. [ATTACH]
[ATTACH]
[ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH] Fenton shifter and t handle to t5. I cut the handle off and drilled I then ground a flat on shortened t5 shifter and tapped....
in the photo you can see the lines below the logo the left runs to a plate behind the thermostat and the right goes to a homemade t in heater line
[IMG]
I run a 261 with 2 5200 holleys, cam from patricks, fenton split exhaust and 2.8 electronic distributer. The distributer was worth 2 miles per...
I used the peel and seal and then glued in aluminum foil and closed cell foam insulation. The doors shut solid now on my 37 pu.
[ATTACH] [ATTACH] Made with u bends and cones
Here is my 37 that now has a 261 with s10 five speed,two holley twos, 3/4 cam , 848 head , 2.8 electronic ignition and fenton split manifold. Has...
Separate names with a comma.
The Jalopy Journal