The Jalopy Journal
It is an adjustable timing light, and probably imported garbage. The advance dial says it’s off. At this point, I’m thinking the timing light...
I never had a problem with the light before. The engine has been in the car for at least 20 years . I’m going to borrow somebody else’s timing...
I’ve now got it marked on the pulley as well as the balancer
I am on the correct plug wire and I doubt the balancer has slipped. It was running fine before. It just sat for a long time. After I put the...
My SBC is driving me nuts. I pulled the distributor to pre oil the engine ( it has sat for a while). I put it all back together and fired it up....
thamks for that info. I knew something was screwy when both diffs measured the same. Next dumb question: can I use the posi from the 255's with a...
unfortunatly, this carrier is in a street rod, and I can't tell for sure if it was originally a leaf spring or coil spring rear.
Can anybody decode the gm rear axle indentification code that starts with "JUG". I've looked at a ahlf dozen decoder sheets and its not listed....
Summit brand works okay. Just remember that that stuff is all offshore. Edelbrock (as far as I know) is still made here in the USA. I personally...
I have a 20 year+ supercooler(VA) that hasn't worked right in 10 years. I finally figured out that one of the vacumn actuators wasn't "actuating"....
The car is a chopped 46 Ford sedan. The vent windows need to be glued in along with the rear side windows. The guy that chopped it for me did a...
Thanks for the info. Is this product available in "caulking gun type tubes".Is it urethane or butyl? Does it require a primer? I've never done any...
I need to glue in the rear side windows and vent windows in my chopped 48 Ford. I need to use something that I can "feather" out the sealer where...
Thanks guys. These are great places to check. I should have thought of both of these. Sometimes it helps to have somebody else point you in the...
I need to get some rubber to make some splash shields for my 46 Ford on a 66 Chevelle chassis. Scott Drake manufactures the stuff for a Mustang,...
The 46 looks like it is super nice already and I'm sure it will look even better when the top gets completed. Where did you score a Winfield top...
Today I gave up and got a stock distributor. Fired up the first time. Thanks to all that tried to help. Sorry to shinysideup for invading his...
My 70 Torino (429)is giving me" fits"when it comes to the duraspark 2 ignition. One minute it works great, the next nothing. We wired it using...
Toodles to all that responded. Suwanee is BIG on handing out tickets. Other than that its a pretty forgettable place. I also wonder exactly when...
I tripped over your site last night, from a Chevelle forum. Looks cool. I'm actually from Suwanee, ga but nobody knows where that is, or cares....
Separate names with a comma.
The Jalopy Journal