The Jalopy Journal
6 Pate Swapmeet spaces for sale. 6 together in a block--3 double pull thru's. Can meet at gate. $40 ea. 405-641-7392
4 Decatur Swapmeet Spaces for sale. Have 4 spaces. These are 2 pull thru spaces. They are side by side making a block of 4 together....
I think I have some of the garnish moldings. Do you have any pictures of the parts needed?
He did what I did. I have a 54 Delray and I added the BelAir rear quarter trim. If you look at the trim around the windows it is 210 trim. It...
Bethany is about 10 to 15 miles NW of the damage area. All should be well in Bethany. LC
I have a spring tool that I used on my 54 Chevy. If the springs are like the Chevy, I'll loan it to you if you'll pay postage and return it to me.
Check to see if the two chrome coverings on both sides will slide when you bend the channel. I just did mine and some of the cheaper "C" channels...
To quote a saying from the old Bugs Bunny cartoon: "Be Verry!! Verry!! careful!!! Go slow. It's easy to stretch the area around the dimple....
Also be aware of load range ratings. I would use a Load Range "E" for that weight. I don't think you can find a ST tire that isn't made in China.
I want to find the loudest horn possible from a salvage yard. What makes or models have loud 12v horns?
Here's mine.
Do they make a Zip that rises only 3" or are all of them a 5" rise?
Is the insulated enclosure completely sealed? If so, does the pump heat up?
I'll try this. lc
Had to install a vacuum pump, for my brakes,because of the lack of vacuum on my 383 and have added sound deadening behind the back seat, but still...
Here are pictures with headers and inner fenders installed.
here is how much I trimmed to get my 350 in.
I have a base coat with flatten clear on top. Windex works great. I had problems with white spots until I starting using Windex and Micro Towel.
They don't look that bad. Mine were not any better and I took a 90 degree die grinder with the porous sanding disk and cleaned them up. Then I...
Here is mine. Still needs the interior finished and belt line trim.
I just got my first call back from TCI. They said the same thing. I need a 1" extension on the driver side. I guest all manufacturers have the...
If you have a 53/54 Chevy car with a TCI frontend, I have a few question to ask. If you have a power rack on the TCI cross member, is it...
Use Windex. Spray on and wipe with a soft rag until moisture is gone. Works on mine.
Here's picture of the two dash plates side by side. The one without the ashtray opening is from a base model 54.
I have never seen a re-man tension bracket. You have several choices. Find one at a swapmeet, or find another complete dash plate with an...
Here are some pictures.
The ash tray itself has a raised groove on the top of it. On the back of the dash panel, it goes in, there is a "L" shaped bracket that bolts...
I would think leaving the bumper brackets on the original sides. The only problem to solve is the side bumper holes on each end. I have a 54...
The teeth are numbered : Passenger Pk Light----#4-----#2-----#1-----#3------#5-----Driver PK Light larry
You need a #1 tooth. The center tooth is #1. I just put the grill in my 54 and have several extra teeth. Here are some pictures of a #1. It is...
Separate names with a comma.
The Jalopy Journal
