The Jalopy Journal
Finally got a picture. Crappy camera doesn't do it justice. [ATTACH]
Just received pinstriped circular saw blade. Awesome work takes a steady hand. Great job Hotrod Jen!!
That key position it is about 3 teeth to the right of the dot. Almost inline with number 1 cyl at tdc. But he needs a piston stop as previously...
Looks like you could cut tree roots out of a drain pipe with that
I have had more than one rear seal leak turn out to be either distributor or oil pressure switch leaking and running down. Check top of engine in...
I don't think the plastic piece in the pickup was the problem though. I am thinking the problem was the relief valve in the pump sticking or...
Just make sure it is not the oil pressure line up by the distributor leaking first.
Good to hear thanks for posting back
Sounds like it is time to check fuel pressure, compression then restricted exhaust. You also can check ground wires in the computer harness at the...
Just went back and listened to the video. Sounds like the timing is retarded long starting time and no power. Try turning the dist counter...
There is usually a special procedure to set timing on tbi. There may be a tan wire with a black stripe near the brake booster to unplug then set...
Loose pulley?
just googled I have never been there. A & G Carburetor-injection 6136 Roosevelt Rd, Oak Park, IL - 60304-2311 Near Roosevelt Rd, Taylor Ave
You can check for power at ignition coil with key in the on position.
Rocker arms to tight, cranking speed ok, skipped timing chain, are a few other things but hard to tell without more information. With points could...
Had a 351M once that would die like that. Turned out to be coil connection that coil had spade connectors in a plastic housing that slid onto the...
You can try Sluiter Auto Electric of South Holland, IL they are a rebuilder
Try to Google Southwest Spring in Chicago wrenchn
Got me 2 at first. didn't want you following me:D Wooden one I used for aluminium siding.
I had brushes sticking in the alternator once and used to tap the alternator until i could replace them.
From another one who spends a lot of time here. I don't consider it a waste of time with all the education I get here. I just realized I never did...
What happens if you jump the solonoid?
[IMG] Quick and easy brake for aluminium siding to wrap window frames. [IMG] and a stand for the roll of siding
I will have to check my old Underwood to see if it has that ethernet connection on the top there.
i am thinking oil bath air filter would be cool in that cover.
After rereading my post I did not mean take the cover off for less noise. I meant it as a check to see if it is rubbing the flywheel. If the noise...
Since it is loud try running it without the inspection cover under the flywheel. But like other have said what color is red? Wrenchn
That is a extra temp sensor. It has been screwed into different places depending on year. Sometimes the top of a headbolt will be threaded and it...
Happy Birthday Ryan From another one who spends a lot of time here. I don't consider it a waste of time with all the education I get here. I...
When I used a vac guage to set timing I always brought it up to max vac then backed it off 1 to 2 inchs otherwise the engine would ping. Just my...
Separate names with a comma.
The Jalopy Journal
