The Jalopy Journal
Cut the glass first ! then make the roof fit the glass. Or you'll shoot your self !
use the search box first, there are plenty 59 projects here. good luck
This is rare but I've heard of axle shafts being forged rough enough to be slightly off balance. A brake shoe dragging ? Your pinion angle...
We did this one at 1" and it looks fine. The IFS was almost a disaster because the stock upper control arm was out of travel for camber adj....
are both axles the same length ?
machine screw tap, then thread the screw in and pull or push it out.
borrow an old motors manual, explain the system pretty well.
the pinion will rotate if you make them diff. lengths. Pick up a stockcar chassis book ,it will go into more depth with pictures.
Vertex is in Blue Bell,Pa. I used to send them back for a tune up.
you get one try at it ! two shots of starting fluid .........you'll break the tire bead and blow the tire sidewall.
this was 01/2012 I talked with Ron Lubsen of Desman Corp.in SC. 864-225-2580 What an education I received on glass. You supply an exact...
You can cut the hose barb off and use a compression fitting . Earl's has them to AN or just about any combination.
http://www.nastyz28.com/sbchevy/sblock.php
DO you have an air injector pump with the air pipes going into the exhaust ?
GearheadsQCE http://www.jalopyjournal.com/forum/showthread.php?t=730451
Added a couple side view pictures to my F-100 album. All i took. we used a piece of pipe to roll the hand rail tighter then epoxy to attach a...
I think the primer sucks ! It comes off very easy ! I would etch the glass first with something like Armour Etch (glass stemware etching...
Sorry, All the trigonometry in the world can't change the shape of the windshield ! Take a styrofoam cup, turn it upside down , cut a 1/4"...
OK OK Go to Harbor Freight , your going to buy the heaviest sledge hammer they have to get the windshield to fit ! CUT THE WINDSHIELD FIRST !
"Gutziest move I ever seen Maverick" (Top Gun) get any scratches ?
Duke, You have my condolences. 6 mo.s ago a good friend of mine passed away, i've spent 6 mos trying to get his equipment up and running and...
I have a few pictures of flat laminated glass ( look at my "A friends 1953 Ford F-100" Album) i had cut. look at the glass edge. this 'S' was cut...
whoa, 3/8" thats crazy. I had one made for an 82 chevy truck out of 1/8" . they put the windshield and plexiglass in an oven and heated it...
PLEASE READ THIS : https://secure.unitedmarine.net/news/081512d.htm
Ahhh just a thought since you'all don't like my 1/4 turn valves. What about the new seats with HEAT in them. Just to take the edge off.
Do you have the front and rear lines mixed up ? The front bowl doesn't always go to the front brakes.
on a 53 we flipped the spring perches and crossed sides , had to notch and box the rear crossmember. see my picture #15 in my album.
I have a good friend, let me call him in...........
Try household waterlines , yes waterlines Watts faucet lines ! i'll load a picture in my 1953 album (sorry i can't post a pic here, i'm untech)...
First define'overheating' it will push out the overflow (with a good cap) if it is overheating. A high reading gauge ? you can't lay your...
Separate names with a comma.
The Jalopy Journal
