The Jalopy Journal
I thought the suspension was redesigned in '65.
So sorry for your loss. "" In his memory, I'm going to have someone letter the car using the patterns he made. He would get a kick out of that.""...
Sometimes it goes to Spam, has happened to me so gotta check once in a while!
Even 100ft bracket racing is better than none at all!
gimpyshotrods gimpys-hotrods gimpy-shot-rods The way I read it:oops:
At one point in the past I made a whole bunch of spare keys after an episode...:mad:. I know I put spares hidden in one car. I found while...
Ya Gotta Wanna
I read years ago that some will; there was/is an in depth article in Ford Barn I think.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I used the statoseal washers in the banjo fittings in my brake lines and worked fine. Not used Tom's washers yet.
I would bet that its been 20 yrs since I saw a real live Nomad, used to be a few around.
15/32-32 thread nut, weird but I think I saw a listing for 1/4-100 in McMaster-Carr
Stock sparkplugs are BF62. I used to run BF42 and they where fine; engine has head work [ported, valve bowls, milled for maybe 9:1, intake log...
I have not used the Dowty seal, did not know about them. I got the Statoseal from Earls and used them on my 3/8" Banjo fitting brake lines,...
NICE! Thanks for pics!
https://www.jalopyjournal.com/forum/threads/how-does-a-car-get-its-name.1334022/
I have used Hylomar but thought it should cure a little faster? I ended up using Permatex Moto seal, the .062 alum washer and the spanner I made....
That is it! Yesterday I made a spanner wrench after not being able to find a 12pt box wrench, today I found an old 12pt socket that I will cut od...
Here is what I found for gaskets, viton coated aluminum should work. Never knew there was so many choices available! Scroll down. SUM-220116...
Found a spanner like what Summit has but in 7/8, a little time on mill will make it do, thanks. I will check what is available for gasket too.
Jim, yes! I started hunting around for an 12 pt socket or box wrench that I could fab into a tube type wrench. Then I saw your pictured assortment...
^^^^2x^^^^ Sorry but sounds like an Instant T story. If you have proof of ownership?
Vogel Machine. Last I knew they were getting over 1hp per cube on gas and 1.5 or more on alcohol. Single cyl tractor pulling engines, lot of rpm.
I have the typical Holley 780 [3310] dual feed. Is there a special wrench to get the after market dual feed lines [1" Hex] tight? I always have...
How could it be mounted up side down?
I bet the situation is not as grave as the mismatch you are afraid of.
friend of flipper sent pics of this shop and said it’s up for grabs to me. Does that mean free?
Plus the steering wheel is right at eye level?
57+ years, got it out of the field stone stock and a little beat in April of 68', it has morphed a little over the years. [ATTACH] [ATTACH]...
Separate names with a comma.
The Jalopy Journal
