The Jalopy Journal
I'm looking for a 9" rear end to replace my stock rear end on my car. Does anyone know what the stock width is? I would measure mine currently...
What compound pads are you running? They may be too aggressive and your not getting them up to the temp they work best at. How much vacuum are...
I know the front suspension is the same, im pretty sure the rear ends are they same. Are all the body mounts/mounting points, wheelbase, etc......
I notice a few different companies offering disc brake conversions for the galaxie. What is different between all the years? Does anyone know...
Just curious of anyone running into their leaf springs sagging. I have the original leafs on my 60 falcon, and have already radiused my...
Do you have any pictures of your 2x4 setup? build pics or anything?
Thank you everyone for the opinions and pictures. I was already planning on cutting off the front frame rails and making some 2x4 sq tube...
I don't really know what to say back to that... If your stating you don't think it is a good idea in your opinion then ok, i posted this to get...
Would it be era correct to run a 354 or 392 Hemi in a Falcon. I'm shooting for an early 60's gasser and am trying to keep it as correct as...
My 60' that has been forced to the backburner
updatessssss!!!!!!1 haha
do you have the grille and all the side trim?
My dad was always building stuff as i was growing up. When i was about 15 is when i started really getting into it. I'm 24 now and have a couple...
Posting it up here first. I have all the front clip sheetmetal off a 53 ford minus the hood. both front fenders with bezels, blinkers,...
Ditch the grille for a model a or deuce one, relocate the headlights, get rid of the radials, and move the frontend back about 2 feet. My .02...
What about complete fiberglass tilt front end? Are there any outfits making any?
Anyone know of anyone doing fiberglass body parts for the early falcon? I found a company that does 60-63 stuff, like the fender etc... but no...
I'll definitely be there! Bump
anyone have any pictures of continentals sitting on nice astro supremes?
i did, only info i can find is 57 and a half inches flange to flange, it doesnt not state if its from the axle flange or housing flange so i cant...
anyone know off the top of their head what the stock width of the 52 rearends are? Cliffy i'll PM about those rearends.
Anyone know what year 9 inch rear end would be the correct width to put under my 52 ford customline? Looking to run a wilwood rear disc setup on...
I'm looking for a rear end that will fit under my car. I want to run disc brakes and all that good stuff but I don't know what year 9 inch would...
Ive got 52 ford with fatman uprights and im looking at getting a wilwood disc brake kit for it, anyone know if this will work???
Looking for some pictures of some 52 - 54 ford gassers. Curious to see if anyone has done it and how it would look
I love the look of this car. Wondering if there is some info and pictures of it? And even better a build thread if one exists.
is the master cylinder mounted to the firewall? if its drum rear run a 10lb residual pressure valve to the rear. also whats your pedal ratio?...
Those would probably work really well. Ill check those out. Thank you. I may need to find a 2 inch one. 1.5 might be a hair too small
I put dropped uprights on my car and it sits too low with the coils I have. Is there anywhere I can order stock springs?
Separate names with a comma.
The Jalopy Journal
