The Jalopy Journal
Bump
NOS 81-a shift top also sold
bump, shafts and bearings sold
Bump The shafts and bearings are sold!
This is a very nice pair of short (42 -48) Ford rear radius rods.These are favored by most early hot rod builders because they dissappear under...
All NOS Original Ford Script trans parts for your 39 Ford transmission. Vintage USA Made. It doesn't get any better! Prices and part #'s in last...
This is a NOS Ford script 28 Tooth cluster gear for the 39 ford transmission, part # 68-7113a. If you want to build the best 39 trans for your hot...
This is a really nice set of 33/34 pedals. Some orig. Paint left and no pitting.These could be chromed.Bushings are nice and tight.These work fine...
Here's a nice set of 40 drums and hubs.They measure .40 over on my barret brake gauge so well within spec.Some light surface rust but not scored...
Here's a nice pair of 40/41 front drums with hubs. They measure .40 over on my Barrett brake drum gauge so well within spec. ,With enough iron...
bump
First, thanks to everyone that responded and offered thier insight.It was much appreciated. A few guys m entioned that when i finally figured it...
Thanks, i may be heading in that direction out of desperation but after having 3 sets of points and 3 condensers i have a hard time believing they...
Thanks, the car sat for 40 years,not the engine.I think it sat for 2 or 3 years. I trusted the machine shop on the issue of what to reuse and what...
Thanks, The heads were stripped, hot tanked,and milled. The stellite seats were cut the valves were refaced and the springs were tested and found...
Thanks, yes , i didn't just arbitrarily turn the carb around without regard to how ports and exhaust heat outlets were matching up. I suppose...
Thanks, i studied the situation prior to making the decision to reverse the carb so im pretty sure i am not blocking anything. It looks like i...
So the OP is in fact interested in any and all possible solutions.Thats why i posted.I have been away from the project for a week and have not had...
Thanks, not running an alternator so no diode rectifier. Running a generator and regulator.
Thanks, so i had a forced break from it prior to posting. Had my 2nd bout with cancer and after som surgery was not allowed to do anything for a...
Thanks, yes i think thats my next step.
Thanks, but not so simple due to lack of room and distance the orig throttle lever protrudes.I could do it but not real easy.I may rig the...
Thanks, new battery, new cables and terminals so no corrosion.
At this point i only have the header pipes on the engine so no restriction.Thanks though!
Thanks, i made an aluminum base plate that mounts the carb w/o any leaks.I don't know if there is any other reason why mounting the carb backwards...
Separate names with a comma.
The Jalopy Journal
