The Jalopy Journal
Just looking at the hood nose - it looks like there are two "fenders" along side it - a perfect place for some "headlights." That most reminds me...
I know it's all "wood" .... or is it?[ATTACH]
Does Gibbs become dry to the touch and does not attract dirt? (since people use on guns, sounds like it dries dry-to-the-touch.)
This sounds like it could be the answer. Researching: what is it? Is it a coating like a primer or paint? Is it a hard coating? Is it glossy,...
Living 45 min East of Pittsburgh, how do you think I learned to do oxy-acetylene auto body sheet metal welding? (Yes, I worked 15 years in FL for...
Unplated nuts, bolts and rotors: any thing to spray on them to stop rusting from humidity when in storage or parked during winter? (Also would...
You might have a point. Sellers may fully document the rebuilding of all components.
Given the collapse of the T10 used parts market and while blown reverses are probably the most popular gear replacement, there is probably no...
Good grief, I'm well aware and use both Uline and especially McMaster but it never occurred to me to check them. Thanks!
You'd think my using hard drive magnets for butt welding auto body sheet metal, that I'd have thought of magnetic tie anchors. I did think of...
The connector has provision for a T-head push barb. NOTE: It would be easy to use plastic ties around the frame, but that's Mickey Mouse and...
I had & tried some commercial strength lime away (removes CLR) and it not bad. AlumaNew sounds like a good product. I have a auto service...
What I found follows, but looking for method that has worked for someone already. Thanks Tom PS: For what it's worth, here is what I've found:...
They're stuck all the way in. Every light spec in the pic is a needle completely in the fins. Compressed air and vacuum did hardly anything....
Looks like the front case is aluminum with an steel side cover? I know they make aluminum ones (I actually have one dated 1963) so what is...
In my collection of T10 parts, I'm trying to ID a strange "4-Lug" Reverse Idler Gear and related Thin Reverse Gear. QUESTION: Is the 4-Lug Idler...
Ospho is more than just phosphoric acid. O can leave patches of a hard thick black residue - PA doesn't. So the $64 question has always been,...
I assume you're talking abut my No Name "Mystery" shifter?
Great to know! I have 4 I'm IDing but this is the only one with the 6-digit - and it is in the place where the OE manu put their part number. GM...
I may be wrong, but I thought I saw a housing stamping that was on the inside! If the limit bolts are indicative of aftermarket, then it's just...
Both of these were acquired in the early 70's
I just posted the "numbered mystery" Should I put pics of the No-Name? Why not (!) haha You can see on the 1st pic an "L" stamped (frankly, it...
EDIT: THIS IS WRONG: Does not say "Hurst" or "Competition/Plus" - only that 6 digit number. It does say "Hurst Competition/Plus" and the 6...
They're both going. I'd rather have a comfortable modern car that gets good gas mileage - I'm 70 and no interest in drama. I do not enjoy...
Sort of a Swan Song here - just sold my numbers matching 63 Super Red R2 Package Super Lark with swapped in B57 R4 (a la R3) engine. Had it since...
Shut Eyes Tip never thought of it! Will try very next strike but I'm thinking it will make a difference. In fact, the trick might be to use...
And yes, as I suspected, there are "3D Vision" helmets which use cameras, processing and displays so you see everything except the arc flash (!)...
First let me clarify by what I mean by "can't see" the puddle: it's all about the filter shade #. There are 3 objectives: 1) see surrounding...
Since you never liked them, that sounds like they don't let one see the puddle any better - I really don't care about the color, only the puddle.
They claim better vision of surrounding features - being able to follow a line, gap, seam, etc. (auto body welding is a PITA compared to...
Separate names with a comma.
The Jalopy Journal
