The Jalopy Journal
I just checked that out. I have to use the jeep 4.0 flex plate and starter to install the overdive trans..it was a good idea, but won"t work.
overdrive I guess I should have worded that differently The 360 is externally balanced(damper& flex plate) . The transmission is from a jeep...
Well this is on my 73 Javlin, which is externally balanced, The trans mission is a 87 jeep unit which is internally balanced. I know this is not...
Doing an engine swap. The engine is externaly balanced. The stock flex plate for the engine has balance weight on it. The trans flex plate and...
Since you have one apart. Can you tell me , what the size is of the hole in the trim ring ? And also how tall the trim ring is when sitting on a...
Thanks, I'll check out Youtube :)
The one on the top
How can the center cap , the complete center hub assy be removed from a 56 Cadillac sombrero hubca/, without damaging the outer ring section ?
Thanks for that information. That was my plan all along..But I thought I would ask first. I could not see why it would'nt work. Thanks again.
I'm just asking..could you bridge the posts of the ammeter with the diode shunt like a piggy back add on ? would that work in the same way ?...
What gauge wire should be use for the diode shunt wire?.... { from battery ( diode shunt in middle) then wire to alternator.}??? my...
And that's why I'm looking for a better answer.
Let me ask you this. Are you still using fusible links in your cars/ or builds ? if yes OK. If No why not ? Also if No what are you using. I'm...
Yes the 8ga wire / 12ga fusible link is for the alternator ( a 78amp mopar alternator)....The 12ga wires/16ga fusible link goes to other non fused...
OK, but if you had a short or other problem, won't circuit breakers just cool down and they try to power up the systen over and over again. I...
I want to replace my old fusible links with a safer more modern system. I have 2, 12ga fusible links ( both are going to diferent 8ga wire...
I'm replacing the alternator 12ga wire with an 8ga wire. I'm also bypassing to stock amp gauge and installing a volt meter. I am also adding a...
I want to update the wiring in my 62 Plymouth. There was not much in the way of fusible links back then. I have installed a larger alternator...
Anyone got any ideas of what to use on old glass rubber gasket seals to look better. Mine are old and dry looking. ( the actual rubber glass...
Thanks guys. In my world and maybe yours also $400-$600 a gallon paint is not an option. The more you dump into these cars, you start to ask...
Thanks for the replys. It good to hear that Limco is a decent paint for a guy on a budget.
Recently called local paint supplier to get prices for two paint colors. He asked my budget, I said " not much". So he looked up the paints and...
Is that the metallic color ? or solid ? Side view ?
Guys I could use some pictures of TCP Global " Restoration Shop" Vintage Burgundy Metallic paint with a glossy finish. About all I've found is...
Do you recall the name of that white paint from Restoration Shop or the part/item number..I've been looking at their "Spinnaker White #1110"
So he thinks that the Acrylic Urethane would hold up better than BCCC ? The Acrylic Uretance would be cheaper....long ago I did spray some...
Right now I just want to get my engine bay painted, then move on to the door jambs. I'll leave the outter body panel paint work to someone with...
A lot of guys keep saying to me " buy better " PPG" paints and materials" because lesser brands will not hold up, and you'll have to redo the...
My car is never going to be the " best in show" nor do I care. I've been looking for some budget paint for it. Was just looking at Restoration...
What is the number of 3m crarcoal filter pack you use ?
Separate names with a comma.
The Jalopy Journal
