The Jalopy Journal
That is all I needed to know. Didn't want to order the wrong parts when I get down to it! Thanks for all the info!
Awesome! Thanks for all the replies! I will get it opened up and see what is needed!
I need some help identifying this tranny. I plan to tear it down and rebuild what is needed but want to order the correct parts first time! The...
See below, but the new dizzy does have a shaft extension below the drive gear but so does the stock one!
Have the dizzy in hand, looks good. Measurement from mounting plate to bottom of drive gear is the same as stock. Shaft projects about a quarter...
Found a decent picture on Dennis Carpenter's site, under bed runners. Think I can figure it out from there!
I don't have the "Z" piece. That is what I need. pic and dimensions would help. I have the rear.
Nobody??
This is a long shot but possible. With the noise present, spray soap or belt dressing on the belts. I had one that sounded like a bad rod once it...
Can anyone tell me the dimensions of the crossers that go between the frame and the wooden planks on a 52 F1? I have 2 that are about 1-1/4" in...
Anyone have an "actual" wiring diagram for a 52 F1? I have 48, 49 and 51 and while all are similar, they are not the same. specifically, the 51...
Awesome!! Thanks so much!
Anyone have a drawing of the transmission mount hole locations on a hogs head bell housing? I have a 50 Ford car OD unit and need to see if there...
The release bearing is a different set up. I have a car one and it uses what I would call a modern style fork. The truck uses a rotary action. I...
The link took me to their site but would not let me contact them. Hopefully someone sees this. No pics. I was somewhere I wasn't supposed to be. I...
That link is a dud!
I came across what I think may be a 26 Buick 6 cylinder engine and tranny. It is surely tight, considering where it is lying but it seems fairly...
I have an OD unit from a 50 Ford car. I want to install it in my 52 F1. Will the hogs head bell let me do this by re drilling the mating bolts? I...
Is there a bellhousing this will bolt to that lets me use the truck pedal and linkage or am I getting a car bell and switching to a slave?
Here is what I have![ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
A little more info, Input shaft measures 6" from tranny face to the end. 1" -10 spline input shaft. Pilot shaft is .665", 4 bolt pattern, 5 1/4"...
I have just aquired a Borg Warner R10E-1 tranny and am having trouble determining what it was originally installed in. Solenoid indicates...
No worries, shipping costs are outrageous anyway! I will look at Carlisle next month!
Looks like what I need. Is it for sale?
Seems the bell I have is not the same as shown above. Mine has the release bearing in it but uses a fork style arm to activate it. I need the...
I have a few pieces of no interest to me, need to clear out. 1942 Block, no pistons or heads. Has a post 49 crank in it with the correct cam gear....
I believe that is the bell housing that I have! And the tranny picture looks like what I am trying to buy. Thanks!
My tranny bolts to the bellhousing. Release bearing is part of the "mini bell". I also have a 3 speed top loader style that would also bolt up.
Thanks for all the info! I wasn't trying to start a fight, just wanted some "fresh" info on current Zinc levels. My Cleveland is a fresh rebuild...
Yes, I have! Most threads are too old to be relevant since the oil companies can change their formulas at will. What was gospel 3 years ago is now...
Separate names with a comma.
The Jalopy Journal
