The Jalopy Journal
I'm going with exhaust being plugged
yes I have a bead roller and was planning to use it. That good info Thanks
Thanks
I'm building a model A on deuce rails and getting ready to build the floor boards. I'm planning to using tubing under the sheet metal, but I'm...
Thanks guys! the paint and reducer was what I had leftover from a couple of years ago. I will buy fresh paint and reducer, mix as instructed and...
My roadster is painted with tractor supply satin black, I painted it a couple of years ago. I had to repaint a door yesterday and it dried flat....
Ok I need a little help. My roadster is painted with tractor paint(from tractor supply - same as blitz black) I painted it a couple of years ago....
I have them in my roadster, if they don't make noise at idle then you have them adjusted too tight. If they are adjusted correctly they will make...
You are not going to know until you get weight on the front end, right now the axle and spring is hanging!
I have Hurst, with no problems
:DThe ROUNDUP!! The only thing that I've been to that's better then the Roundup is speedweek-Bonneville. I've been to the round-up the last 5...
Bonneville - speedweek
I'll be there. Expect to roll in at about 10:00am Thur.:D
thanks
etching aluminum wheel cleaner - good idea! thanks
Ok I guess I should have explained better. I'm looking for a way to clean it with it on the engine. i'm just trying to keep it new looking
Does anyone have any secerts on how to clean an alum. intake?:confused:
Bonneville Bonneville Leadsled nationals Lonestar Roundup Bonneville Bonneville
I had the same problem with my 283 and it also has 3x2 setup and I also thought it was the carbs - it wasn't. I was setting my timing by ear at...
You can buy a valve from Speedway motors the take care of that problem. Your old pump is over powering the rack. It is a simple fix it take about...
My sister and her family are in Estadada. The Wilson's Welcome to the HAMB you will love it.
Help Please!!! My brother in-law has a 55 chev hardtop. He has just got it running and he said it runs fine until the engine heats up. he's...
I had the same problem with mine. I put return spring on both of the secondary carbs and adjusted the fuel pressure to 3lbs, I had it at 4 1/2lbs...
Alright everyone just a quick question This winter I am going to build a transmission tunnel for my roadster out of metal (no fiberglass) I am...
The problem is not when the secondary carbs come in it is when its at an idle and I step on the throttle the problem is the primary carb. The...
A couple of questions I have a 283 with 3-2's Rochesters When I first step on it it stumbles after the stumble it will jump naked on you, but the...
Thanks for the advice. The cam is good because when I back off on the rocker arm it runs fine it just makes noise and stops sending oil. I don't...
The lifters are not sending oil unless I screw them way down put it then kills the cylinder.
The engine only has a couple of thousand miles on it, so I don't think anything is wore out. The lifters under idle will not pump-up, but when i...
Separate names with a comma.
The Jalopy Journal
