The Jalopy Journal
Truck is looking great!!
We've done the Miss on the bike a number of times.... Would be great to do it with the car...
Nice Truck!! They are called a Fridge by those that have them for obvious reasons, and are now getting quite popular, esp. the shortbox versions....
I'm from North Central WI, and would be down for something like this... we try to put miles on the truck whenever we can and really want something...
If this is a serpentine setup, Ford Racing makes a Power Steering pump eliminator for this purpose... a new shorter belt will be required. If...
The swap has change a little in the last few years... Thursday/Friday are the big days and swappers start to close up Saturday afternoon now.......
Save yourself some time and aggravation, and forget building a Clevor....I went down that road years back.... Best bang for the buck with stock...
Just set up the rear, and tack your brackets in... then once you get the motor/trans installed and everything loaded, cut the tacks, set your...
Rain-ex the crap out of your windshield my friend... I put like (3) coats on mine and have driven through some hellacious rain this summer (the...
Welcome from the Wausau area... :)
Nice project! I picked up a 66 f100 also a couple of months ago. Been using it as a daily driver and going to keep using it. [ATTACH]
Welcome from Central WI......Nice ElCamino..... Tom
I'm in the camp of "go for it"... I love the early motors (reason I run a 327 in my chev) and the 396 is iconic... build it to rev, and sound...
I have a Miller 211 and love it. The dual voltage is great to have. It does run a little "hotter" than my Lincoln ProMig 140 i replaced it with...
Hood and side vents are '38, the cab looks like a '38 but being from across the pond, might not be. The radiator shroud is curious.....My '38 has...
I just recently sold my Lincoln ProMig 140 for $350.00. It was a 110 volt and I used it to build (2) cars and a bunch of other stuff...... was a...
I have several. I build what I like, then use it as much as possible. I may need to cut back at some point, and honestly do not know which I could...
Junkyardjeff, I also went with a Vega box on my '38 half ton, also went to cross steer on it. I used the Patriot "fat fender" fenderwell headers...
+1.... yup, douche vendor is spending it, sorry to say....
Wheels could probably get by with a quart. The frame, etc will be maybe a couple of quarts and the body, jams trunk you will probably use a gallon...
I used Kwikwire and it was a good kit, had everything, and good instructions. They wre also somewhat local and attend quite a number of carshows...
Never could understand this look.... Never fond of it either. .... Posted using the Full Custom H.A.M.B. App!
I've got the Eastwood one to.... and I hate it...... The reason I hate it is it works really well, and now I've been doing brake and fuel lines...
I have a Champion (3) row in an OT car and a un-named one in my '38.... both have worked good and no problems. Both of these are fully welded (no...
For a good economical gun that really sprays nice, and does not use much air, check out the Astro Pneumatic 4014 EVO LVLP. This gun is designed to...
Welcome from the Wausau-Mosinee area.... Posted using the Full Custom H.A.M.B. App!
Every kind of car and bike under the sun. The roads are always bumper to bumper, as everyone drives around.... the show itself is only part of the...
Awesome nice day, only the wind is a pain .... Lots of nice cars... Great to be out of the rain. Posted using the Full Custom H.A.M.B. App!
Made a few good buys, most of which were not for my car, but for my trailer... I agree, the amount of really good older parts was kind of scarce....
Looks like the rain may hold off.... Plan is for us to leave late Friday, and hope the trans holds together in the Chevy.... Maybe just trailer it...
Separate names with a comma.
The Jalopy Journal
