The Jalopy Journal
Thats a 72 C10
http://www.vibratesoftware.com/html_help/html/Diagnosis/Propshaft/Propshaft_Angles.htm This explains it all. And what to do when it out of spec.
there isn't much to know. A few safety thing like never put a flamible liquid in it regardless who tells you to . for one it atomizes kero and...
You have to pull the motor, the engine mounts are on the crossmember and the member you now have to mount the engine most likely will be in the...
It’s very possible that the shipping lines are in New York. The shipping lines need title in their possession and it attachéd to the...
In the situation of road racing where you change parts faster than socks it makes little difference on wear, they want grip and are trying to...
You might think that if you had all you documentation with dated stamps and all the history of the design and the patent you would be safe. For...
copyrights cover ideas or words assembled as a book but not as indvidual words it would cover the image in a photo but not the subject of the...
50's GM maunal brake. try www.kanters.com
One of two things causes this to happen. Using solid wire without gas and/or having a magnet to close to the weld, Or just behind it. It disrupts...
All bags have a range they are supposed to operate in. It is suggested by the MFG. You should go to the MFG site and ask or see if they have it in...
To the best of my knowledge the 6 cyl. bell in 55 was different than the v8 bell. You need a V8 trans for this swap. I don't think the splade...
Merely pointing the gap into the cylinder does not get you anywhere other than killing a few hours of the day. Indexing is done on a dyno so you...
moisture on the air line will cause this.
When magnesium catches on fire it is very difficult to extinguish and burns extremely hot. It can't be put out with water. It has to be starved of...
Go to www.americanclassic.com/ to id the truck, run the vin on their site. http://www.classicperform.com/ has a kit to convert to a 73 -87 chevy...
Prop valves don't work very well and actually limit rear braking even to the point of rendering them usless, adjustables aren't much better...
I have to agree. If it was farm tractor it would have narrower slats and a screen of some type. Any kind of earth moving would be of cast iron or...
Get some wire called "Twenty Gauge" By JW Harris it weld thin panels better than anything I've used before. Its a cored wire not a flux core wire....
#1. Raise it up and round the wheel well a little. #2. Or just raise it so it is eqaully distanced from the top of the front well downward and...
You can use a 73-87 to get the disc brakes and it is almost a bolt in but its to wide, even if you use off set wheels, it still sticks out of the...
Eaton Spring can make the springs for you. Tell them what you have and how low you want it. http://www.eatonsprings.com/
Separate names with a comma.
The Jalopy Journal