The Jalopy Journal
Nice run stand for that purdy motor.
https://www.discbrakeswap.com/Mustang Disc Brake Conversion Kits CATALOG.html CSRP has been making them for years now.
Performance adapters has one that is not as thick as speed gems....
It's probably because you have that ugly distributor on there. lol. All kidding aside it's a nice car for a decent buck. I think you'll just need...
Got any pictures of that? I tried with my 460 and the box was right in way of the #8 exhaust port.
Those bushings can be pressed to where ever you want. It could have very well just been pressed on a little deeper. When you look at the frame...
Put it on Fb market place or in the appropriate FB groups. As much as I like these old forums they are dieing. I think your ad is good. I like to...
Master cyl bore depends on if you have manual or power brakes. 7/8 -15/16" for manual and power 1- 1 1/4". It can be involved that's why it's...
If it's been sitting they are probably rusty or that cable could be broken. If the cable is broken usually the drivers side will move some so I'm...
Merry Christmas!
This is for my 56. I bought it off of ebay so you could check there. [ATTACH]
I'd like to put one in my 56 but they are still too expensive. You are starting to see some Holley controlled Godzillas now. The motor is cheap...
I'd give a shout out to MadDog headers. They make the swap headers for these cars that you get from Crites so they are familiar with the layout....
Champion seems to be very popular because they are cheap. I've never had one so I can't comment on how well they work but people seem to like...
To add, there is several junk yard fans that could work and move a ton of air. Taurus, Contour and Lincoln Mk 8. Youtube is a great source for...
Borgeson lists the same box for 52-64 so I don't know about them being different bolt pattern. The Borgeson box is 16:1 vs the stock 20:1 ratio....
Haha you have never been in a Louisiana rain storm. I have a Cobra and Tbucket with no wipers and that theory only works in light rain. I find it...
I have a pusher in my V8 Pinto because there is no room but when you look at pusher specs non of them flow as much as a puller fan. I only use...
I used MC39567 which is from an 84 (??) Ranger. It is 15/16 and I have one on my 56 and one on my 64 Galaxie. I added the Wilwood prop valve and...
At the 2019 PRI show I spoke with the older gentlemen that I'm guessing owns FR. They also make a R&P for some Fords but not ours. All these...
I did a straight xmember and boxed the frame in my car. It has a cross flow radiator and doesn't need that drop for radiator clearance. I made my...
56 wood template I made over the 54 member template from the group. [ATTACH]
FWIW, here is my 56 on top of the 54 Template I loaded from the group. The LCA holes are in a different location (lower). [ATTACH]
I have a question about the hole for the LCA bolt. Is it slightly lower on the rear side? 1/16-1/8" then the front? My Xmember was too rusted...
Yes the 54 is different then the 55/56.
460 fits fine. The only downside I can see is you can't run power steering and any kind of overdrive can get expensive. Headers are available from...
Never done...[ATTACH]
Thank you for the post. I just ordered some as well.
I thought there was a couple companies making them now. Albeit for more money then Goodall charged.
It definitely doesn't fit with a 460.[ATTACH]
Separate names with a comma.