The Jalopy Journal
A good chance the goggles came off after they suddenly accumulated a couple of quarts of oil. Makes it easier to see where you're going...........
Bill Thomas X3.
There was one pulley combo that we used occasionally that didn't need the idler.
The wheelbase on your '40 1/2 ton is 112". It appears that you are probably dealing with a bed from a '42 or later truck which has a 114" wheelbase.
This is the first of two IFS cars that Woody Gilmore produced. Owner/Driver Tommy "The Watchdog" Allen got drafted into the Army and sold it to...
^^^ With the head assembled, pour some gas into each port and let it sit for a couple of minutes. Then inspect the combustion chamber for...
Being a long time Deluxe owner I spent years with a luke warm feeling toward the Standard. But over the years the Standard has grown on me and I...
The connection at the intake manifold is the vacuum source.
Joe Jackson's story ended at Long Beach when he agreed to test drive someone else's car, drove off the track and crashed. He passed away three...
Were it not for the crooks that dwell amongst us, an automobile would not be any different than a refrigerator. No title required. But let's blame...
It is for situations like this that the small claims court system was created. If she doesn't step up and take responsibility, you take your claim...
1185 E. Holt Ave. Pomona, CA
MotorTrend TV
Unless they've been enlarged, that 1955 Buick has like 1 3/8" exhaust valves. I doubt that you would ever notice the difference.
Wheel Vintiques makes the same '42 Ford repro cap as the one shown in 7 1/2" ID that will fit that wheel.
That wheel looks like a Wheel Vintique Smoothie series which takes a 7 1/2" ID cap as opposed to the Gennie series wheel which takes your standard...
Open the doors one at a time and manually push in on the switch plungers and see if the dome light goes out. One or both of the switches may be...
Yes, the entire west side of the state fronts on the Pacific Ocean.
Try the link in post #8.
http://www.alangrovecomponents.com/Ford_Flathead.htm
Near lane is the Allen & Huff AA/FD with Tommy "The Watchdog" Allen up. Thanks for posting. I have many photos of us at Carlsbad but I've never...
Thanks for sharing your unsolicited opinion of the brand with us, but it lends absolutely no substance to the OP's inquiry.
I had the opportunity to see it about 6 weeks ago. The resto work is coming along slowly but surely.
Herzlich willkommen! Ich war schon zweimal in Köln. Meine Mutterfamilie kommen aus Mönchengladbach.
My filler pipe and tank are original Henry Ford and the pipe sticks out of the fender the same amount as yours.
And here's exactly the reason why most new residential communities come equipped with HOA's.
A vacuum gauge is a great diagnostic tool. Connect one to any manifold vacuum source and see what that tells you.
I notched the lower frame rail in the X-member for easy pan removal and then I added a removable piece of flat stock to the rail to maintain...
I just received Mike Kubarth's new "everything you ever wanted to know about the 1940 Ford" book available from the Early V8 Club. According to...
If that's supposed to be a correct nuts and bolts restoration then they used the wrong exhaust system. With the exception of the color and the...
Separate names with a comma.