The Jalopy Journal
Do V8-60’s have issues with cracked blocks? If so is there any areas that cracks are common?
This is a Millworks spring with 3 leafs removed 6.00x19 tire stock frame.
Here are pics Titus posted back in 2014 of twisting model A arms [ATTACH] [ATTACH]
I bought one of those AEM gauges to tune my 31. Gauge fried immediately, got a replacement it also acted up. RF interference from the stock...
I also modified the stock dash [ATTACH]
[ATTACH] [ATTACH] March 2023 to June 2024
1931 Tudor. My first Banger Stock engine .060 bore with Burtz head, Burns intake and Stromberg 97
I’m installing new motor mount rubbers in my 31. I’m looking at 1/4 inch I need to spread the frame to do the install. After everything is in...
Do 35 wire wheels have a different centerline offset compared to a 19 inch a wheel?
I have a stock 1931 Ford Tudor, I’m looking to lower it and add wider rear tires to fit in the stock rear fenders. Right now I have the stock 19...
Problem solved float bowl air vent was plugged runs like a million bucks. It’s been sitting since 1965 [ATTACH][ATTACH]
[ATTACH] There is no tag on the carb. I measured the Venturi it’s .950 at the smallest point. [ATTACH]
It’s a marvel schebler. This carb is remarkably clean inside I have soaked and blown out all the passages. Does anyone know what size the idle jet...
Yes, no mater where that is set same result. The mounting flange was severely warped, I did flatten that out.
I have a completely stock 31 A. It has a Marvel carb on it that will not idle or rev up without the choke partially on. I have had this carb...
I was lucky enough to find a stock GM take out posi carrier on *b*y. Swapped out my ring gear and put it in my stock case. I had to shorten my...
[ATTACH] [ATTACH] My 41
Sweet truck, I really like the color!
Got mine from Summit with free shipping. Had what i wanted in stock.
Thanks, I have that site saved. I used it when inspecting and assembling my unit.
I thought i would answer my own question. I installed the factory 1958 posi unit in the 58 non posi housing. The axles seemed to be original and i...
Im puting a factory posi unit in a non posi case. 58 chevy. Looking at the unit itself it is not like a later spring/clutch pack unit, like a...
My first car was a 63 i got from my aunt. She bought it new. My dad had a 63 4 door hard top. He drove it nearly 200 thousand miles but the body...
Ive been wondering what the reason behind Ford putting a door lock on the passenger side only on 40,41 trucks? Other years also? Is there some...
Separate names with a comma.
The Jalopy Journal
