The Jalopy Journal
I need to figure out some things concerning my 55 Dodge 270 Hemi. I think I made a mistake when having the machine work done. I had the crank...
241 crank, cam and block for $300 or $150 for cam and $200 for the crank. Block has pitting in one one cylinder and would need a sleeve. I can...
Only one valve cover with wire cover. Shipping extra, ships from Brodhead Wisconsin
See pictures for condition. I have other Dodge and Chrysler early hemi engines and parts available, let me know what you need
Will fit 241 270 315 or 325. One has a ding and the end has a crack and end has ding on the other. I have other Dodge early hemi engines and...
Only one valve cover, not all bent up. Some rust pitting on inside. I havecother Dodge and Chrysler early hemi parts if interested
Very nice set of wire covers for a 241, 270, 315,or 325 dodge hemi. Ships from Brodhead Wisconsin. I have several Dodge and Chrysler engines and...
I got an engine stall problem with a 1955 Dodge 270 Hemi 2-barrel engine and the PowerFlite transmission. (1) Whenever I put it in drive either...
Motor mount that goes on the bottom of the waterpump on the 241 and 270 dodge hemi and poly engines
The bare metal one has a repair done as seen in the pictures, a few minor dings, overall these are in good shape. I have other Dodge and Chrysler...
900 without viewing covers, 1200 with valve covers. Std bore, pistons removed. I can ship via Fastenal Colorado and East for 150 to 250. I can...
Red Ram Hemi valve covers. $330 plus shipping. I have several 241/270/325 dodge early Hemi engines and parts for sale as well as 354 hemis
This is a 259 block with 270 hemi heads. I have a 2 brl intake I will include $700 without valve covers. Valve covers available at an extra...
$75 for the rusty one on left with std mains and rods. $280 for the one on the right with 10 over mains and 20 over rods. Shipping paid by buyer
$250 plus shipping. I have several 241/270/325 engines and parts. Let me know what you need.
Nice set. Message and I can send more pictures
259 (VT338 engine ID) engine with 270 hemi heads (1554132 casting) and std bore high compression pistons (Forged True brand based on the marking)....
Block casting 1635729 - 1956 which has the engine mounts on the side of the block....hard to find for the low decks. The bore is 3.655" so it...
Bored 60 over some time ago and then stored an not finished near as I can tell. The engine ID startswith D44. Appears to have high compression...
This is a parts engine. The block has three cylinders with cracks. The crank is standard, however has some rust that I am not certain if it will...
I can send pictures if interested
This will be my second and more ambitious build of a vintage motor. The first was a 315 Dodge Poly converted to a 325 Hemi. A very satisfying...
Separate names with a comma.
The Jalopy Journal
