The Jalopy Journal
Only one valve cover with wire cover. Shipping extra, ships from Brodhead Wisconsin
See pictures for condition. I have other Dodge and Chrysler early hemi engines and parts available, let me know what you need
Not certain this can be used, look at the pictures of pitting....I have other Dodge and Chrysler early hemi engines and parts, let me know what...
I have a D500 block which is not much good except for a mockup block as 4 holes are cracked. No maincaps at this price....they are available for...
Will fit 241 270 315 or 325. One has a ding and the end has a crack and end has ding on the other. I have other Dodge early hemi engines and...
Std bore block with maincaps. Engine ID is D44 I have a one head, crank and cam available for an additional cost. I can ship via Fastenal or...
Only one valve cover, not all bent up. Some rust pitting on inside. I havecother Dodge and Chrysler early hemi parts if interested
Very nice set of wire covers for a 241, 270, 315,or 325 dodge hemi. Ships from Brodhead Wisconsin. I have several Dodge and Chrysler engines and...
I have 276 heads, timing cover, 276 pistons and rods also available
2 Rockers - $100 2 Valve covers -$225 2 heads = $250 Or all together for $500. I can send pictures. I can ship via Fastenal. I will consider...
Motor mount that goes on the bottom of the waterpump on the 241 and 270 dodge hemi and poly engines
The bare metal one has a repair done as seen in the pictures, a few minor dings, overall these are in good shape. I have other Dodge and Chrysler...
900 without viewing covers, 1200 with valve covers. Std bore, pistons removed. I can ship via Fastenal Colorado and East for 150 to 250. I can...
$400 Block, crank, oil pan, 2brl intake and poly heads if you want them.
Red Ram Hemi valve covers. $330 plus shipping. I have several 241/270/325 dodge early Hemi engines and parts for sale as well as 354 hemis
This is a 259 block with 270 hemi heads. I have a 2 brl intake I will include $700 without valve covers. Valve covers available at an extra...
$75 for the rusty one on left with std mains and rods. $280 for the one on the right with 10 over mains and 20 over rods. Shipping paid by buyer
$250 plus shipping. I have several 241/270/325 engines and parts. Let me know what you need.
Hello, I looked around and could not not find an answer specifically to my question. I am considering buying a 1954 +/- Poly "Semi Hemi" 241 or...
Nice set. Message and I can send more pictures
has been hot tanked an checked for cracks by the prior owner. I can ship via Fastenal or SpeeDee. I also have a 276 block and heads, another 330...
259 (VT338 engine ID) engine with 270 hemi heads (1554132 casting) and std bore high compression pistons (Forged True brand based on the marking)....
276 hemi (30 over I think)--- cylinders look good -no ridge. See pictures. If interested I can send more. parts prices below. I also have a 330...
Block casting 1635729 - 1956 which has the engine mounts on the side of the block....hard to find for the low decks. The bore is 3.655" so it...
Bored 60 over some time ago and then stored an not finished near as I can tell. The engine ID startswith D44. Appears to have high compression...
This is a parts engine. The block has three cylinders with cracks. The crank is standard, however has some rust that I am not certain if it will...
I can send pictures if interested
cam core that would need a regrind - see pictures. would consider trades for dodge 315/325 poly or hemi parts [ATTACH]
Hey all, Just joined up after doing a lot of research here over the months and stealing a lot of great ideas and info...decided to join the group....
From a KD500 engine. If interested email and I can send a picture. I have three 315/325 engines that I have extra parts from. Let me know what...
Separate names with a comma.
The Jalopy Journal
