The Jalopy Journal
I believe these are NOS, but they have been not stored well. Assume they will need to be rebuilt. [ATTACH] Left upper & lower: 8A2182 late '40s -...
I'm having braking issues with my Ford F1. When the truck was built over 10 years ago, I kept the rear drums but added the speedway front disc kit...
Dual reservoir didn’t quite fit mount so I had to drill out the bolt holes on the master cylinder and grind the top off some. what’s the...
Hey guys, I'm replacing the master cylinder on my '48 Cadillac and I'm looking for any tips or advice that wise men might have about how to bleed...
Interior looks great, plunger works
So this is what i used to get rid of the treadle vac system on our 1954 lincoln capri cost about 200 bucks total. While we were at it replaced...
C
Hi fellas, I ran into an issue I need some ideas for a solution. I am building a '31 Ford Sedan. The motor (350), trans (350), body, and steering...
I recently bought a hot rod built in the 50's that has been sitting dormant since about 1960. It is going to be a bit before I get it home and...
I recently installed a set of 48-52 f1 pedals, crossmember and a new master cylinder in my model A chassis. The brake pedal has to lay so far...
After a long winter break, I'm finally finishing up the '50 Shoebox. Sorted the 8BA Fathead out, and it's now running like a dream. Almost ready...
I've recently purchased a '48 Ford Tudor that previous builder/owner has installed a Disc Brake front and running stock Drums in rear however I...
SOLD -Wilwood 260-8555 aluminum tandem master cylinder (1" bore) with vertical/horizontal adapter plate and 340-13834 aluminum brake pedal, clevis...
Sold
I want to put disc brakes on my 50 Ford and am considering moving the master cylinder to the firewall. Has anybody done that, and what kit did you...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] rebuildable master cylinder for the 1949 -1951 Ford probably a replacement part because it is marked...
... from a Disc/Drum to Disc/Disc? I had read somewhere that the only difference is a valve that you either add or remove. Any info would be...
I did a front disc brake swap ( kit came with everything even brake lines) all new parts. master cylinder has been bench bleed more than...
I must preface, I had a mental block and didn't quite understand how HAMB itemizes things, and accidentally posted the previous thread under...
Does anyone have a part number or car specific application for a Ford, manual dual drum/drum master cylinder with internal 10 psi check valves...
Got me a set of 46 front and rear drums for my 30 Sedan. http://www.jalopyjournal.com/forum/threads/project-30-tudor.793436/page-3#post-11252794...
This is a really nice, brand new, never installed 1 1/8th" Bore dual outlet OEM Corvette/GM style Master Cylinder by MBM Brakes, part #MC2912ACH....
Separate names with a comma.
The Jalopy Journal
