The Jalopy Journal
I got a fairly recent bias G-78 on a fifties Buick wheel. An intermittent slow leak. Just leaks out whenever it wants. I can see where I applied...
I bought this tach at the Quick Times swap on Saturday, The seller was impoverished in terms of info: " I don't know" (a) if it works (b) what it...
I hope this info will help others on a ‘34 Ford front door window glass installation. This will require two people to complete, one to manipulate...
Up for sale is the first generation of the sun super tach which was produced in 1965. This tach is the predecessor to the blue and greenline...
Im hoping yall can help me figure out what looks to be a GM 3 speed OD..? & whats its application would be. I got all of this together years...
I'm sure most 32 guru's have seen the Tindal 32 orange crate with it's tilt body & several other similar subjects including 'T' & 'A' bodied race...
While going through the process of tightening up the '39 pedal assembly in my roadster build, I came to the unfortunate realization that a guy is...
I don't get in the mix much besides sifting through all of the awesome material here. Have done several projects over the years learning every...
So I have been searching for months now and really not making any progress. A couple years ago my grandfather scored part of a early corvette dual...
Hey everyone. I want to get your opinion on some wiring schemes. So I need to be able to power my pertronix ignition and electronic fuel pump. I...
How long has flex pipe been around? Is it considered 'period correct' for a late-50's - early-60's build? The PO used a low-bidder muffler shop...
Hey guys! I don't know if it's tech week yet but I thought I'd add this handy information anyways. Hope it's helpfull! :) How to participate in...
Today I broke the latch that keeps the door closed on my drivers door. I'm having a hard time finding a replacement online. I was wondering if...
Is any one using a shut off valve to isolate the fuel tank. If so what type of valve are you using? Thanks in advance! Walter
I have a 59 chevy bel air with a 235 engine. I want to install an alternator, but I have a generator with the power assist attached to it. What...
Hopefully this will help others of you as well. I don't have AC in my truck, and 400 for a Thermador just wasn't going to happen. So after a bit...
There seemed to be some interest in covering this subject when I mentioned it over on the SURE COULD USE A TECH WEEK thread, so here goes. The...
Separate names with a comma.
The Jalopy Journal
