The Jalopy Journal
Hot Rod Drive Train (25% of sale to Benefit American Cancer Society) *sold together only* Small block Ford (302) HO engine from 1995 Mustang GT...
Replaced my th200 with a th200r4. The th200 is a 3 speed similar to the th350. Took off my Chevy 350. Works-ish, Just being honest. It shifts...
The 350 was behind a 327 I switched over to a Muncie 4 speed. And the C4 came out from behind my flat head in the 32
PAGE 2) Have lots of 30' Chevrolet and GM parts. Four complete stove bolt 216's. one that was recently rebuilt. Hood sides for a 33 Chevy truck (2...
PAGE 1) Have lots of 30' Chevrolet and GM parts. Four complete stove bolt 216's. one that was recently rebuilt. Hood sides for a 33 Chevy truck...
Could someone please identify this transmission? I believe it’s a late 30s Chrysler top shift, over drive trans. Any help would be appreciated....
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Couple of transmissions and lots of parts. The 2 transmission cases are 78-7006...
I just picked up a Muncie M21 4 speed for my 1938 Chevy pickup project. I need to mount my Hurst Competition Plus shifter the most forward I can...
I see a lot of info about using the T176 shifter on a 4 speed toploader transmission but does anyone actually use a T176 4 speed transmission in...
I've recently installed a new Blueprint 383 and bolted up to a TCI TH350 in my 67 Camaro. With the torque converter fully seated in the...
So I currently have a th200 (metric) in my 1950 ford f1. I got a th200r4 with torque converter from a guy off Craigslist. He said it ran fine when...
There are a couple of current threads on the BARN about NOT running LZ gears in heavier, maybe 2800lbs cars. I have a set of 25 tooth cluster sets...
ClutchFlyte Trans. Fully shortened, Chevy input and front mount. Unknown shift kit. Suspect it was operated with an external pump. Fully...
Trans came out of a '53 Ford pickup. Has Borg Warner R10 overdrive. Spins freely and shifts into all gears. Comes with bellhousing and starter...
So on my way back to work today I began having an issue on my 54 Bel Air, that I suspect to be a transmission issue. I was running 55-60mph, and...
I searchded the forums and the web, but did not find anything about converting a late Flathead open trans to a tube shaft. I have an open rear...
Up for sale is a later style Muncie M20 four speed. This transmission was rebuilt by me a few years ago and put in my Chevelle. It’s got...
Flathead v8 transmission with overdrive. 1946 Lincoln 3 Speed transmission with, overdrive in great shape. I bought it several years ago, For a 41...
Hey Everyone! So I’m working on a project with a SBC with a TH350 trans. I bought it “non-running” with flat tires and once I freed up the brakes...
NOS 1957-1958 Cadillac NOS shift indicator in dealer package. $50.00 payment by PayPal Friends and Family Free shipping to lower 48 states.[ATTACH]
Resolved! Guys, I need some knowledge: I am building my first transmission, a Mopar 3 speed overdrive. I have built engines and a rear...
I posted this in the wrong section earlier today and wanted to see if someone can help identify it and possible value. I have been told it is...
Posted in wrong section sorry
OK, I have a newly rebuilt TH400 that the slip yoke will not slide on to. It appears the opening ID of the rear seal is to small for the yoke. I...
[ATTACH] [ATTACH] This one is in great shape. Includes shifter top, U-joint, and pedals. Only removed to replace with a '39 and a V8. Pick up in...
I have a [ATTACH] [ATTACH] [ATTACH] Vacuum Controlled Shift do hickey. I thought it may be for a 3sp OD but have not found anything on it. pick...
Just bought this from another HAMBer and lost my job. Reverse gear has some tooth edge grinding but no missing teeth. Great start for the better...
For some reason, after my car is warmed up, the reverse lights stay on…after it sits and cools down, they will work normally. I’ve changed the...
Hello, Im finishing up a blow through 351W swap in my 62 Flareside and ordered a 11” 351W/302 clutch kit for a V8 pattern 3 speed I found....
I haven’t had much luck finding a usable top shift LaSalle for a project I’m working on but I do have a nice side shift LaSalle from a low...
Separate names with a comma.