This is my dad’s T buObviously it’s partially a 28/29 model A. My dad bought this as an unfinished project in the early/mid 80’s from somebody in Ky and finished it. It is what looks to be a closed car cowl, unknown back panel. The engine is a Chrysler 273 V8, unknown 3 speed transmission (probably from the car the engine came out of), and a rear that loads from the back. The square trim piece is because he wouldn’t fit in it. He extended the body 4 inches and never got around to making the upholstery one piece. The bad part is he got sick a few years ago and never touched it again. It probably hasn’t started in 10 years. I didn’t try to make it run. It’s been sitting in my mom’s garage for a long time. I tried to take lots of pictures of the stuff that may be of interest. Cobwebs come free of charge. I did zero clean up- just rolled it outside. More words below the pictures It should be an “easy” project for somebody, or at a minimum you are not starting with a disaster. Car is located just outside of Chattanooga, Tenn. Clear title. If I remember correctly, VIN assigned by the Tenn state police, or at least I went with him for an inspection. Please ask any questions. Thanks!
The Jalopy Journal
