1925 Ford Roadster / Speedster project – Complete original drivetrain, engine turns over with good compression. I bought this chassis to originally build a speedster but then I found a ’25 roadster tub, then I got a set of wire wheels and hubs and just kept collecting parts. Here is a list of everything the car comes with: - ’25 Roadster tub (tacked together with only a couple tacks for mock up and dreaming) - ’26-’27 original wire wheels and hubs, tires are shot but hold air - Speedster style gas tank, nice original windshield frame, battery holder w/ 6 volt battery, exhaust pipe and muffler pieces, 4 coil boxes, good steering wheel to replaced cracked one currently on the car, dash panel, extra fire wall, extra cowl top, running board brackets, 1 hood (not sure if it is correct, might be tall ones and this needs a short one?) - 2 different pairs of disc wheels. Not sure off of what but was starting to collect disc wheels for this build. Also comes with 3 model A wheels too. - Rear spring already has a reverse eye treatment done to it - Comes with a new set of shackles for the front end, new outside oil line kit Clear open and current title Located in Yachats, Oregon 97498 (Central coast of Oregon) $3000 Firm
The Jalopy Journal
