1925 Ford Roadster / Speedster project – Complete original drivetrain, engine turns over with good compression. I bought this chassis to originally build a speedster but then I found a ’25 roadster tub, then I got a set of wire wheels and hubs and just kept collecting parts. Here is a list of everything the car comes with: - ’25 Roadster tub (tacked together with only a couple tacks for mock up and dreaming) - ’26-’27 original wire wheels and hubs - Speedster style gas tank, nice original windshield frame, battery holder w/ 6 volt battery, exhaust pipe and muffler pieces, 4 coil boxes, good steering wheel to replaced cracked one currently on the car, dash panel, extra fire wall, extra cowl top, running board brackets, 1 hood (not sure if it is correct, might be tall ones and this needs a short one?) - 2 different pairs of disc wheels. Not sure off of what but was starting to collect disc wheels for this build. Also comes with 3 model A wheels too. - Extra front end from a ’26-’27. Spindles will lower the front a bit and I was going to use the spring and front end to be sent off to Sid’s Drop Axle for reverse eye spring and 3” drop but never got that far. - Rear spring already has a reverse eye treatment done to it - Comes with a new set of shackles for the front end, new outside oil line kit and a new generator mounted on the engine. I have additional pictures I can email. Clear current title $3000 I can be reached at 602-616-3083 Located in Yachats, Oregon 97498 (Central coast of Oregon) I also have a 1926 Ford Coupe I am selling as well and willing to make a package deal for both. It is listed on here as well.
The Jalopy Journal
