Hot Rods 1927 Ford T Touring Windshield help

Well it is time to get the gl*** into the Mr. Roadster Chrome upper and lower windshield halves. Do any of you very helpful hot rodders know of a gl*** shop in Austin TX that would cut and mount the gl*** into the frame?

I am sure that it would have to be laminated gl*** which together with the mounting tape would be a tight fit into the 5/16"-wide channel of these frames.

Any other advice on this topic would be welcome. I was surprised for example that the lower ends of the top frame are approximately 1/4 - 3/8" narrower than the top ends of the lower frame. To me it looks like some distortion caused when they welded the frame.

THANKS IN ADVANCE FOR ANY HELP THAT MIGHT BE OFFERED.
Michael