I had these coupe parts stashed away to sell to a buddy but as things are tight for a lot of us right now it never came to pass. So with a somewhat heavy heart I offer them to the HAMB. Garnish moldings Ok, to start off...the door garnish moldings aren't actually for a '32 FORD three window. It's clear they're for a '32 three window something but what exactly I couldn't tell you. They're a surprisingly close match to Ford ones but will require some work to be perfect. Ones has been cut in half for trial fitting and then tacked back together after an original set was found. The rear window garnish is in fact original '32 Ford three window. Someone had the odd idea of flaring out the interior lip to give it a different way of lapping over the interior. It's been carefully wrapped back over by a decently skilled metal guy but will need finishing to be perfect. So there ya have it, not perfect but brookville is charging $1895 for their set with originals sometimes fetching more. SOLD Here it is compared to my stock ford garnish (which is not for sale) Here is stacked right to left with the Ford Garnish on top for comparison. Rear Garnish Dashboard What a cool hot rod piece, the real deal smoothed dash. Really well built with a heavy steel flat panel added. The Dash holds 7 gauges, two 3-3/8" speedo and tach and five 2-5/8" gauges. Came out of a channeled car but if that's not what you're looking for included is the bottom of a '32 dash for the curve and bead. SOLD I threw some spare gauges in to show the sizes (gauges NOT included) Original door tins, upper set are beautiful with the rear jam tins trimmed a bit maybe for a chop? SOLD Complete seat pan. I took the best parts of a pair and put together a pretty nice seat pan with lots of the odds and ends. The sides of the pan are a bit on the thin side but that's not terribly uncommon. The adjuster, the tab that mounts to the floor and both sliders are included. Also included is the seat back wood and steel strip along the top. Shipping might get kinda pricey but I'll do my best to keep the cost down. Sale pending Bare seat pan no extras with some rust though on one side SOLD Homemade glovebox door and hinge. Picked this up with the intent to install a glovebox in a non three window dash but it never happened. It's built from raw stampings and it's pretty decent. Repops are $295 and originals are getting $400-600. $100+S/H Fiberglass glovebox door and hinge. Another random piece that came with a project. It's a solidly build fiberglass replica. $30+S/H Reproduction cardboard glovebox. Lined with material and hard to tell it's not steel when installed. $20+S/H
A bump with another item The elusive green cats eye cigar lighter that was only available on the deluxe three window coupe in 1932. The receptacle has the adapter for a flat dash mount but can easily be ground or cut off so it can fit into the factory hole in the center of the dash. Has a slight amber tinge to it but when I shine a flashlight behind it glows that distinct apple green. These have never been easy to find. $250+S/H Flashlight shone behind it
The Jalopy Journal
