Hey gang, A good bud of mine needs to part with his Tudor sedan project. This car is something he has been working on off and on for years, but here goes... Chopped 4", All patch panels done (Howard, the owner, works in one of the valley's better metal working shops!) along with floors, unchopped repro garnish moldings, windshield frame, dash with '56 Olds insert, steel grill shell, top insert kit, window regulators, door handles, taillights, some interior hardware. The ch***is is based on aftermarket rails with a full X-member, dropped axle, hairpins and early ford brakes. 9" rear, four bar, traverse spring, Vega steering box, chrome steelies. Engine is a 307 punched to 327 and has flat top pistons, an Edelbrock intake and AFB carb. I can say that after shooting the pictures of this today, this is a pretty damned nice little car. It's got the right look and it's not going to need too much to get to driver status, and would be very nice base for those that are looking to do a very shiny, well finished car. If you are in town for the auctions the next couple of weeks, it would be well worth your time to stop down in central Phoenix and check this out. Howard can be reached at 602 638 6696. He is the owner and builder, and can answer any questions you have. If you would like to contact me, I can be reached on 602 881 0175 at any time. Thanks, Chip Quinn
The Jalopy Journal
