33-4 ford 1/2 ton chassis, which was streached about 24" and had a huckster body on it. all the parts that were used to alter the wheel base were factory made , some parts are either cast or forged. the frame was cut in 2 with a hack saw and all the conversion parts were bolted in place nothing welded. there is a second closed drive shaft to make up the difference. the short drive shaft i have seen before in early ton and ton and half trucks that had a closed drive shaft . does anyone know anything about the company that made these parts. made putting the chassis back together easy, removed all the bolts and slide it back together. nice straight cuts. all the parts i still have if anyone is interested in them. my guess these were also used on hearse and ambulances