1933 Ford 5w coupe roller with Tx ***le in my name that matches vin on ch***is. The coupe rolls around with ease. First off this is a real 5w coupe that has had some amateur patches installed and they really need to be redone. It’s hard to telling what shape tbe frame is really in without pulling the body but for the most part I think it’s fine and just needs to get blasted. Both crossmembers are in great shape. Original ‘33 frame with matching ***le that’s not cut up with ‘40 ford rear banjo, ‘36 original dropped and drilled front axle with unsplit wishbone. Excelsior 7.50-16 on rear in great shape with Excelsior 5.50-16 rollers. Has the ‘33 dash and pedals still in the car. It has some pitting on p***enger side on the inside panels and b pillar. Driver side not the case with pitting. Both doors open and close kinda ****py because the body needs to be shimmed for them to fit correctly. Most of the patches they installed look bad and the body has a few cracks. Overall it’s just needs to be redone. Look at the pic you’ll see it all. Any questions just ask. Shipping is buyers responsibility.
The Jalopy Journal
