I'm selling the project I've been working on for the past couple years to pay for a new project. This is my '33 cab. Patches were welded in around the cowl bottoms, back, and cab corners. Firewall holes welded closed. Lots of bodywork done. New brackets in the four corners where I was planning to attach to a 1x2 subframe (at stock height). The whole thing was media blasted inside and out and epoxy primed. The individual pieces are loose right now. They are only braced together to set the door width. It would travel safest in pieces rather than loose and floppy with no bottom support. I have a complete set of new bolts and screws for the cab, new hinge pins, extra hinges, all the sheetmetal parts. The doors still need a lot of work, but I've straightened where they were damaged at the bottom hinge, from opening too far at some point. Really all the hard work has been done. Just needs someone to finish the doors, deal with the area of the cowl vent, build a subfloor, address the drip rails, and do the finer bodywork. I can't ship if for you. Local pickup only.
Bump. Price lowered. I am willing to load it onto a pallet for shipment if needed. It can be picked up at a business address.
Cab SOLD. Doors and windshield frame are still available though. Asking $750 for the pair of doors. $125 for windshield frame.
The Jalopy Journal
