Register now to get rid of these ads!

1940 Ford bumper question......

Discussion in 'The Hokey Ass Message Board' started by Deuce Roadster, May 16, 2004.

  1. Deuce Roadster
    Joined: Sep 8, 2002
    Posts: 9,519

    Deuce Roadster
    Member Emeritus

    [​IMG]



    It is well known that I am a 32 Ford fellow at heart.

    BUT I have this old 40 Ford coupe I mess with ..time to time and I need to know about bumpers. When the coupe got rear ended in Georgia last year, I bought ( EBAY ) two 40 Ford bumpers (original but rechromed) for the coupe. I put the best one on the rear. I am a procastinator.........today I went to put on the other one and the holes are way off. Like 3 inches per side. This is on the front of a 40 standard coupe. I know that the bumper braces are different than a DeLuxe..... [​IMG]..... but what's the deal with the bumper ?


    Thanks .in advance.......Randy aka Deuce Roadster


    [​IMG]
     
  2. InPrimer
    Joined: Mar 10, 2003
    Posts: 778

    InPrimer
    Member

    i got a friend who owns 2 stock 40's will ck out the hole measurements for you if you can give me a little time...
    will get back to ya IP
     
  3. Boones
    Joined: Mar 4, 2001
    Posts: 9,689

    Boones
    Member
    from Kent, Wa

    Randy, if you dont get much feed back I will call my dad and have him measure his 40's I know one is a standard but not sure about the other..
     
  4. HOTRODPRIMER
    Joined: Jan 3, 2003
    Posts: 64,720

    HOTRODPRIMER
    ALLIANCE MEMBER

    You know I have had a few 40 fords over the years and I never knew there was a difference in the braces! [​IMG]
    HRP
     
  5. InPrimer
    Joined: Mar 10, 2003
    Posts: 778

    InPrimer
    Member

    Hey Deuce here's the scoop on the 40, they are smooth faced bumpers the centerline of the holes for the brackets is 5&1/8 inch next(INNER) hole is 21&1/8 inchs from the outside of the bumper. now, he as 39's also and they have a concave rib all along the middle and their holes are4.75 in and inner hole is 18.25 inchesfrom the outside tip of the bumper. hopes this helps SERGE (INPRIMER)
     
  6. snapper
    Joined: Jan 4, 2004
    Posts: 531

    snapper
    Member
    from PNW

    Randy : Drakes and Mac's catalogs show that the 40' front and rear are the same, Standard or Deluxe. Mac's shows the 39' between models different with a pic showing the inner holes further apart on the standard. Hope this helps. Good Luck..... H
     
  7. Deuce Roadster
    Joined: Sep 8, 2002
    Posts: 9,519

    Deuce Roadster
    Member Emeritus

    [ QUOTE ]
    You know I have had a few 40 fords over the years and I never knew there was a difference in the braces! [​IMG]
    HRP

    [/ QUOTE ]


    The front braces tuck in closer on a Standard than a DeLuxe. I noticed it when I had both........you remember the blue DeLuxe 40 coupe I sold back in 2002. I should have kept it too.....but a blue 40 DeLuxe coupe, a black standard 40 coupe and the Deuce Roadster was just too much. The insurance on all 3 is murder.

    I guess I got snookered on EBAY...... [​IMG]

    I got 1 1940 bumper and 1 1939 bumper...... [​IMG]

    Oh Well.......thanks for all the help, had me wondering.


    [​IMG]
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.