Technical 1947 Buick: Interior Door Handle

I need to get the inside door panel off my 1947 Buick. I pulled back the spring-loaded bezel on the handle. But I can't see if there's a pin or a clip or whatever keeps the handle on. Anybody got any advice. I've gotten some good info here and I need some help on this before I break something. Thanks in advance for any help out there.

 

If you haven't got a removal tool for these (easy to make) you can use a thin piece of cloth, rolled up and wrapped around the shaft, it will catch on the hooked end of the clips.

 

Yep.....if the handle is staying put....it's in there!

Ray

 

Thanks for the info. Appreciate it. I'll try it this weekend.