Looking for an easy project to finish--here it is. 47 ford coupe. I'd planned on finishing this car up and turning it, but I've got too many other irons in the fire to do it in a timely fashion. best news upfront--clear NC ***le in my name. Ch***is: good solid original ch***is. professionally installed fatman mustang II kit, TCI sprung rebuilt 9 inch and TCI under floor pedal ***embly. the ch***is has been painted with POR 15, new fuel and brake lines, body rubber and a new poly tank. mostly stock rebuilt 350 (according to the PO) and 2004R trans. Body: New EMS tail pan, *****in floor pans, inner and outer rockers, firewall, dash, stone guards and louvered inner panels. Hagan frenched headlights and a louvered hood. The body is super straight and super solid. It won't take much to get it ready for paint. The PO cut the drip rails off, the PS has been fully welded, dressed and leaded, the DS has not yet. The body has been stripped to bare metal (see pics)and metal etched at this point. also comes with a really nice set of grey leather Mercedes seats. the rears wrap around slightly (ala t-bird) and look like they were made for this car FWIW. Inside has been painted with POR 15. New Stuff included: NIB walker radiator, ididit tilt column with drop and floor plate (installed but not hooked up), new Bob Drake electric wiper conversion, tons of new rubber and hardware, water pump, custom jet coated headers, Alan Grove alt/ace brackets and there's probably some other stuff I bought that I'm forgetting. Will consider trades. Generally prefer older, but I've got eclectic tastes. No newer 4 doors unless it's a wagon. Partial to 35/6 Fords, 26/7 roadsters, 50-53 caddy's and 63 falcons and random long roofs. If I finish hooking up the steering, wire it and finish the plumbing so it runs and drives price goes up so buy now and save this will make a great ride without a ton of work.
bump. it will be one color imminently just finished stripping everything to bare metal. Sent from my SM-G920R4 using H.A.M.B. mobile app
trades considered prefer older and/or drivers. too many irons in the fire right now... Sent from my SM-G920R4 using H.A.M.B. mobile app
updated pics. been fully stripped and in a single coat of etch now. the only filler in this car now is in the frenched headlights and the doors (they were finish bodyworked--I couldn't bring myself to strip them ).
and now for some right side up pics out of the booth Sent from my SM-G920R4 using H.A.M.B. mobile app
The Jalopy Journal
