1960 ford falcon trans swap help!

Just picked up a 1960 ford falcon 4 door with the 170 and the 2 speed ford-o-matic, ive been doing searches for trans swaps but nothing really on all the things really needed for it the c-4 conversion. Can someone please tell me what parts are needed for this?
Thanks for your help.

 

According to this ford tranny look up table 65 to 71 falcons had C4's. You will most likely need the bell housing torque converter and flex plate.
http://www.autorepairmanuals.biz/site/573683/page/374067

You might also want to ask on the ford transmission forum. You need to register to post but there is a lot of good info there.

http://www.network54.com/Forum/260730/

Hope this helps

Larry

 

Check out the falcon site http://www.tffn.net/ . It has probably been done before.

Doug

 

Thanks guys those sites were a big help!