I have a 1963 Plymouth 318 poly engine that I originally bought for my 60 Dodge. I was told it was a very good running engine. I took the engine apart to clean it, and I found a rebuilder tag stuck between the mounting ears of the motor mounts. So I definitely believe that it was a very good running engine. I took it all apart, cleaned it up, and I put a new timing chain in it and gaskets. I then painted it silver. Just the intake and the valve covers need painted yet. I cleaned up the transmission, disassembled it, and I rebuilt it. So, what you have here is a pair of rebuilds. A rebuilt engine and a rebuilt 727. This is the flange type 727 with the parking pin and the cable shifting. You can take this and bolt it into one of the FL cars with the motor mounts I have on the engine. I am asking 1000. I have my original purchase, the gaskets and trans rebuild kit and labor into it, but my 60 is going to get parted out, and I don't have a place for this engine to go.
The Jalopy Journal
