1980 GM 151 4 cyl.front balancer

Anyone found a bolt on front balancer for these newer GM bangers with some m*** to it? I want to replace the little 3 nubber that is on it. All I can find are for serpentine drives. May machine a v drive in one? ATI has a high $$$$$$$$ racing one,not for me.
Any way got the banger connected to an alum.'glide, 4 bolt '46 Lincoln carb adapted and valve cover replaced.Chopped a 235 chev 6 cover to fit.
Hope my 26 modified will run soon.
thanks, 265glide

 

Try Rockauto.com, they carry alot of older parts.

.................Jack

 

Don't know if this is the same thread or will work for you but here are pics of a balancer bolt from a 82 or 83 Iron duke 2.5, seems like a heafty bolt.
It's a little over 2 inches in length and the head size is 24 Metric

 

http://www.dormanproducts.com/gsear...ontiac&model=Fiero&parttype=Harmonic Balancer

 

Solved the problem today. The spare parts pile donated a 283 chev., 6" diameter balancer. I will bore the taper out of it to 1.250" straight, cut .400" off the end and have a balancer for the "banger" Even the pulleys line up!seals are good also.
Thanks all for the input.
265glide