235 guy's I need help

I'm building a 54 235 for the first time and I can't figure out the oil pump.I got the pump mounted but can't figure out how the screen connects to the pump without hitting the crank.Anyone have pics are can tell me where to find a diagram?I tried the search and came up with nothing.
Thanks.

 

you got the tin thingy that goes 90 degrees to crank
and a wire bail slipes over the top of the screen and hooks into the holes on tin thingy

how about a pikure of what you doing???

 

Here's a picture that may or may not help. Good luck.

 

Thanks for the pic.I'm missing that tubing.There is a br*** fitting in the block on the oppisite side of the pump and I can't figure out if some tubing comes from the pump to that fitting are not.I didn't tear the engine apart for the rebuild so I'm starting from scratch
Thanks.

 

Yes, there should be a tube from the pump to the block that feeds oil to the main oil galley and on through the engine.