Howdy all, First off, thanks to you guys for all the informative posts. They've been incredibly helpful, particularly while building the ch***is for our latest project - a 27 T coupe. I've been building bikes and hot rods for 40 years or so but this is my first ground up car. It's currently a roller and I expect we'll be driving by late spring. With the help of a couple good friends from HAMB we (I should say THEY) got the top chopped 8" and sectioned the body 4", all in a couple of evenings. The motor if a full race flathead, '39 ford ******, '56 Chevy rear end, 4" dropped Super Bell axle, 12" MT street slicks in the rear and Harley tires on Ford wire wheels up front. The ch***is was built with 2"x3"x1/8" tubing and we used 3/4" square tubing for the sub-frame. I'll post a few pics to get started and then update as we move forward. Thanks again to everyone for a great site. R
Welcome to the HAMB RD...Please READ the "STICKY" at the top of this page....you have posted your build in the INTRODUCTION forum pages....INTRODUCE YOURSELF here then post youe bilud on the main board
Welcome from Maryland. You will find all the information you need for your build. T coupes are some of the best looking hot rods out there.........I might be a bit prejudiced
The Jalopy Journal
