30 coupe on 32 frame?

Just wandering what you guys have done when channeling just a little(1/2),i have a little open space to fill some how or just leave open.Any pics

 

I can see the quality of the build in those two photos, fill it and you'll be happy. Bob

 

felt strip on - daylight gone.

 

im sure the open gap wont hurt anything other than being loud,i know channeling just a little was a pain in the ***

 

What are you guys doing to the rear qtr and wheel well area when you channel a little?Bodys a little narrow for stock 32 frame width in back,i see most are sitting on top of frame.

 

Pie cuts in the wheel well. Check my build thread. I think I have a pic or two in there.

 

http://www.jalopyjournal.com/forum/showthread.php?t=657692
http://www.jalopyjournal.com/forum/showthread.php?t=613236

Plenty of info is just a quick search away, these are just a couple I have saved for my roadster project, If it don't end up a race car first.

Scotty

 

I've done a few of these and I pie cut the wheel wells and do a pie cut at the cowl to get the front down a little. If you can find it check the 04 NSRA giveaway 30 RPU. It has the pie cut cowl with a 2 inch shortened 32 Walker radiator and deuce shell. everything flowed really good.