Projects 302 Ford Heater question.

Just got a 3 door heater for my 46 that has a 302 engine and a Edelbrock intake. The heater is bolted through the lower firewall like stock. Where would be the best place to tap into a water source for the heater?

 

Stock places on the engine. One should be on the water pump housing and the other on the intake.

 

What Jimmy Six said. The intake will possibly have a pipe plug in it currently and water pump should have a rubber cap clamped on it.

 

Thanks guy's

 

Did you find the mentioned areas? Able to hook some heat?

 

The water from the manifold should be the "in" bottom of heater core, top "out" goes to water pump.

Sent from my SM-G900V using The H.A.M.B. mobile app

 

Some Edelbrock intakes like this one https://images.search.yahoo.com/sea...-b74b-445c-b977-fa7b48a8b6e7.jpg&action=click Have a water cross over at the back that you could use and have less hose clutter under the hood. If there is enough meat in the manifold you could tap into the aera where the water port in the head is.

 

I am going thru this on my build. This is what I ended up doing to keep the clutter down.

SPark