'32 ford inside chassis header ideas

Are there any SBC inside the ch***is headers besides the block huggers
that will clear the Vega steering on a '32 Ford?

How about full length?

Any feedback is appreciated.

 

You should probably include what kind of engine you're running..

 

Sorry 'bout that.

 

SBC=small block chevrolet

 

i dont think that was originaly included....

 

Patriot had a couple of long tube headers for that ch***is with an SBC and a Vega box. H8018 and H8039 are two to look at.

 

speedway offers a pair that are bent in the right areas to clear...they will work fine if your motor is up in the ch***is or the car isn't real low. as they tend to hang down at the collector , especially the drivers side. they list them for a 28-34. brandon

 

For my 32 ... I bought a set of S and S headers ... part no 5205 ( big tube, full length )

Go here http://www.ssheaders.com/streetrod.htm

I forget the price ... but I bought them already coated

 

both these sets fit my A narrower frame...trywhy type.....photo shows location eng in frame...ended up using longer set proper trywhy routing ..short set looked to street rod hugger type